Magazine| Contact| Catalogues
+49 2683 - 9799 0
0
Magazine Contact Catalogues
+49 2683 - 9799 0

Cylinder block and crankshaft - BN1 and BN2

Filter
–
Austin Healey Kolbensatz
Piston set
in 100M specification. 88 mm diameter, dished top and 8.5:1 compression ratio
More info...

€1,182.92
Product number: 328933
BN1 and BN2 (1952-56)
Austin Healey Kolbensatz
Piston set
in 100M specification. 88.5 mm diameter, dished top and 8.5:1 compression ratio
More info...

€1,182.92
Product number: 328934
BN1 and BN2 (1952-56)
Austin Healey Kolbensatz
Piston set
in 100M specification. 89 mm diameter, dished top and 8.5:1 compression ratio
More info...

€1,182.92
Product number: 328935
BN1 and BN2 (1953-56)
MG Kolbensatz
Piston set
made from aluminium forgings. Specifications: flat top pistons with 88 mm diameter and 10.5:1 compression ratio. Please note: using these pistons the cylinder head and block needs skimming
More info...

€1,364.56
Product number: 328936
BN1 and BN2 (1952-56)
Austin Healey Kurbelwelle
Crankshaft
new item made from EN40B steel, nitride hardened version with knife edge webs for throughout rev. range and ready ground to suit our rear oil seal. Please note: this crank must be fitted with our stee
More info...

€6,953.92
Product number: 328938
BN1 and BN2 (1952-56)
MG Pleuel
Con rods
forged steel 'H' beam type, complete with bolts. Supplied in sets of 4 for use with steel crankshaft 328938
More info...

€4,028.97
Product number: 328940
BN1 and BN2
Satz Pleuelbolzen
Con rod bolts
for the small end - high grade 8470 chrome moly with a tensile strength of 220.000 psi ensure substantial strength and reduce stretching. Supplied in sets of 4
More info...

€17.74
Product number: 530652
BN1 and BN2 (1953-56)
Kettenrad Kurbelwelle
Crankshaft sprocket
double row
More info...

€241.87
Product number: 204691
BN1 to BJ8 (1953-68)
Competition Steuerkette
Iwis Timing chain
uprated double row endless chain with 62 pitches
More info...

€89.00
Product number: 318819
BN1 to BJ8 (1953-68)
Schwingungsdämpfer Harmonic balancer Amortisseur de vibration T
Harmonic balancer
crankshaft - complete with fan belt disc. Improved copy with 3/8” fan belt width
More info...

€422.45
Product number: 19942
BN4 to BJ8. BN1 and BN2 need in addition our narrow fan belt conversion kit part no. 321222. For BJ8 models from engine no. 29K-H10272 onwards, water pump 205370 and fan belt 205376 is need in addition
Schwingungsdämpfer
Harmonic balancer
crankshaft - Full Race type
More info...

€809.56
Product number: 513058
BN1 to BJ8 (1953-68)
Riemenscheibe Pulley Poulie Koło pasowe Riemschijf Polea Pulegg
Pulley
competition variant without damper
More info...

€352.88
Product number: 328942
Umrüstsatz auf Simmerring
Oil seal conversion kit
crankshaft rear
More info...

€388.44
Product number: 327924
BN1 - BN2
Simmerring
Oil seal
replacement seal for for our crankshaft conversion kit (part no. 327924)
More info...

€85.66
Product number: 303382
Motorplatte
Engine plate
rear - alloy replacement with 1750 gram weight
More info...

€588.05
Product number: 491441
BN1 and BN2 (1952-56)
Placeholder image for Flywheel
Flywheel
without starter ring gear. Competition version made from high quality steel to suit the 9.1/2" clutch
More info...

€883.15
Product number: 328957
BN1 to BJ8 (1952-68)
Befestigungsblech
Flywheel
without starter ring gear. Full race version made from high quality steel to suit the 7.1/2" AP racing clutch
More info...

€1,186.08
Product number: 328958
BN4 to BJ8 (1956-68)
Zahnkranz Ring gear Couronne dentée Corona dentada
Ring gear
for competition and full race flywheel. Lightweight type wth 11 kg weigth and 0.375" tickness. Please note: This ring gear must be used together with starter motor 25949
More info...

€363.85
Product number: 205672
BN1 to BJ8 (1952-68)
Ölwanne
Oil sump
made from alloy
More info...

€359.00
Product number: 15275
BN1 and BN2 (1953-56)
Reparaturblech Repair panel Tôle de réparation Blacha naprawcz
Repair panel
oil sump bottom
More info...

€119.00
Product number: 548573
BN1 and BN2 (1953-56)
Stainless steel hose
Stainless steel hose
oil pump - flexible pipe which eliminates any risk of stress fractures
More info...

€193.79
Product number: 324724
BN1 and BN2 (1953-56)
Ölschleuderblech
Baffle plate
bolt in type for aluminium oil sump
More info...

€94.66
Product number: 204693
BN1 and BN2 (1952-56)
%
Austin Healey Umbausatz
Conversion kit
with 3 pulleys and 1 narrow fan belt. This conversion runs with the original fan
More info...

€456.19

€410.55
Product number: 321222
BN1 and BN2 (1953-56)
Stößelbecher
Cam follower
modified version, approx. 10g lighter than standard
More info...

€35.74
Product number: 205802
BN1 and BN2 (1953-56)
This website uses cookies to ensure the best experience possible. More information...