Dynamo
C45 type - reconditioned, in exchange. Dimensions: shaft diameter: 17 mm, PCD of fixing holes: 137 mm, distance between mounting brackets (at the holes): 160 mm, housing diameter: 115 mm
BN1 to BJ7 (1953-63)
Required: 1
BN1 to BJ7
Required: 1
through brackets, length: 189 mm - C45 dynamo
BN1 to BJ7
Required: 2
dynamo
BN1 to BJ7
Required: 1
C45 dynamo. Dimensions: 1 x 7/8" and 1/4" thick
BN1 to BN6
Required: 1
for Lucas C39 and C45 dynamo. Dimensions: 3/4 x 5/8" and 1/4" thick
BN7, BT7 and BJ7
Required: 1
C45 dynamo. Dimensions: 1" x 3/4" and 5/16" thick
Required: 1
commutator end - LU22456, LU22483
BN1 to BJ7
Required: 1
commutator end - LU22519, LU22530
BN1 to BJ7
Required: 1
Lucas C42 type - exchange. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm
BJ8 (1963-68)
Required: 1
new item. Reproduction of the Lucas C42 type dynamo. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 145 mm, distance between mounting brackets (at the holes): 164 mm, housing diameter: 108 mm
BJ8 (1963-68)
Required: 1
BJ8
Required: 1
BJ8
Required: 2
dynamo
BJ8
Required: 1
for brush set on C39, C40 and C42 dynamo - 2-piece set
BJ8
Required: 2
kit includes alternator, bracket, pulley, fan belt and hardware. It is necessary to convert the car from positive to negative earth.
BN1 and BN2 (1953-56)
Required: 1
kits include alternator, pulley and fan. It is converting the car from positive to negative ground
BN4 to BJ8 (1956-68) - needed mounting bracket: 324770
Required: 1
stronger lightweigth alloy version for Lucas C45 dynamo
BN1 and BN2
Required: 1
for Lucas C45 dynamo - fits to 15 mm shaft
BN1 and BN2 (1953-56)
Required: 1
with fan. Stronger lightweigth alloy version for Lucas C45 dynamo - characteristic: outer diameter: 106 mm, shaft bore: 17 mm. Suitable for single V fan belt with 9.5 mm width
BN4, BN6, BN7, BT7 and BJ7
Required: 1
with fan. Stronger lightweigth alloy version for Lucas C39, C40 and C42 dynamo - characteristic: outer diameter: 106 mm, shaft bore: 15 mm. Suitable for single V fan belt with 13 mm width
BJ8 from engine no 29K-H10272
Required: 1
for Lucas C45 dynamo - fits to 15 mm shaft
BN4 to BJ7 (1956-63)
Required: 1
for C40 and C42 dynamo - fits to 15 mm shaft
BJ8 (1963-68)
Required: 1
front, with dynamo bracket. Identified by bracket with 17.5 cm outer width
BN4, BN6, BN7, BT7 and BJ7 (1956-63)
Required: 1
front, with dynamo bracket. Identified by bracket with 17.5 cm outer width
BJ8 (1963-68)
Required: 1
dynamo
BN4, BN6, BN7, BT7, BJ7 and BJ8 (1956-68)
Required: 1
for setting alternator belt tension - made of nylon
BN1 to BJ8 (1953-68)
Required: 1
dynamo
BN4, BN6, BN7, BT7 and BJ7 (1956-63)
Required: 1
dynamo - used item. Please note: the adjusting link shown in the photo is not included in the scope of delivery
BJ8 (1963-68)
Required: 1
