Fuel tank
with cord
BN4 to BJ8
Required: 1
period style, made from chromed stainless steel - locking and vented
BN4 to BJ8
Required: 1
fuel filler neck
BN4, BN6, BN7, BT7, BJ7 and BJ8 (1956-68)
Required: 1
fuel filler neck - improved reproduction made of silicone
BN4, BN6, BN7, BT7, BJ7 and BJ8 (1956-68)
Required: 1
fuel tank to body
BN1 and BN2
Required: 2
replacement. Please note: the float arm needs to be bend to the OE arm specification
BN1 to BJ7
Required: 1
BN1 and BN2
Required: 1
between fuel tank and fuel pump
BJ7 and BJ8 (1962-68)
Required: 1
from fuel pump to front carburettor
BN4, BN6, plus BN7 and BT7 with twin SU-HD6 carburettors to engine no. 29D-26212 (1956-61)
Required: 1
pump to carburettor
BN7 and BT7 - triple carburettor
Required: 1
between fuel pump and carburettor
BJ7 and BJ8 (1962-68)
Required: 1
BJ7 and BJ8
Required: 1
pipe to carburettor
BN4 to 58726. Models with genuine float lid
with genuine float lid
Required: 1
pipe to carburettor
BN4 from 58277, BN6, BN7 and BT7. BN7 and BT7 to 29D-H26212. Twin carburettor.
Required: 1
between both carburettors
BN4, BN6, BN7 and BT7. BN7 and BT7 to 29D-H26212. Twin carburettor.
Required: 1
float chamber
BN4, BN6, BN7 and BT7. BN7 and BT7 to 29D-H26212. Twin carburettor.
Required: 2
pipe to carburettor
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
front to middle carburettor
BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 5
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 5
fuel hose
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
middle to rear carburettor
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 1
BN7 and BT7. BN7 and BT7 from 29E-H101. Triple carburettor.
Required: 5
for fuel hoses with an inner diameter from 1/4 to 5/16"
Required: 1
chromed - for fuel hoses with an inner diameter from 5/16"
Required: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", cotton braided
Required: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", braided with zinc plated wire
Required: 1
for hthe interior coating of fuel tanks
This fluid puts an protective film on the entire inside surface
Required: 1
Content: 500 ml (€95.80 / 1000 ml)
quick release type with 2.1/2" inside diameter, made from polished aluminium
Required: 1
quick release type with 2.1/2" inside diameter, made from chrome plated brass
Required: 1
quick release type with 2.1/2" inside diameter, made from polished aluminium
Required: 1
quick release type with 2.1/2" inside diameter, locking variant made from polished aluminium
Locking
Required: 1
quick release type with 2.1/2" inside diameter, made from chrome plated brass
Required: 1
for non locking Aston and Monza filler caps with 2.1/2" inside diameter. Must be soldered to the filler neck
Required: 1
