Calix Engine pre-heater
The connection set must be ordered separately.
230 volts, 500 watts, PTC heating element for 4 to 16 litres of cooling water, plastic housing without pump, hose connections 16 mm.
The connection set must be ordered separately.
1.
One cold start corresponds to 200 km of driving, nothing damages a car engine more than a cold start. If an engine were always kept at temperature, it would last practically indefinitely.
2.
A preheated engine at operating temperature starts quickly, warm oil is light-bodied, cold oil is as viscous as honey. The battery, starter motor and ignition lock are protected.
3.
In the cold start phase, fuel consumption is increased by 300 % to 400 %.
4.
Aggressive exhaust gases are produced due to incomplete combustion. These harm the engine, the exhaust and the environment.
5.
The comfort is also quite pleasant: warm car, warm seats, warm steering wheel, no ice scraping.
6.
Safety: windows do not mist up, good visibility.
The Calix CVH (Continuously Variable Heater) engine preheater continuously adjusts the heating power to the rising coolant temperature by means of a PTC element.
A PTC element is an electrical component with temperature-dependent resistance. Its positive temperature coefficient allows the current to flow better at low temperatures than at high ones. A thermostat is superfluous. The control is extremely reliable and safe.
The power of 500 watts is designed for a coolant volume of 4-16 litres.
With the additionally available pump kit, the engine can be heated up even faster.
Hose connection: | 16 mm |
---|
Accessory Calix Engine pre-heater
![Placeholder image for Calix Pump Kit](https://www.limora.com/theme/10bdbfc95bd94a473dfc2d0af02a7984/assets/logo/webshop_placeholder.jpg?1723722282665892)