Cylinder head (1957-75)
high quality rubber reproduction
500 N, D, F, L and R
Required: 1
bare head less valves and springs - reconditioned, in exchange
500 N and D with 479 and 499,5 cc
Required: 1
bare head less valves and springs - reconditioned, in exchange
500 F and L with 499,5 cc
Required: 1
for 594cc engines. Bare head less valves and springs - reconditioned, in exchange
500 R with 594 ccm
Required: 1
classic soft material head gasket on metal layer - for 499.5 cc engines
500 F and L (1965-72)
Required: 1
classic sheet metal gasket with 0.8 mm thickness - for 594cc engines
500 R (1972-75)
Required: 1
classic copper gasket on metal layer with 0.2 mm thickness - for 594cc engines
500 R (1972-75)
Required: 1
500 N and D with 479 and 499,5 cc
Required: 1
with tin head gasket with 0.8 mm thickness - for 594cc engines
500 R (1972-75)
Required: 1
to fix rocker arm adjusting screw - identify by M6 thread
500 N, D and F
Required: 4
to fix rocker arm adjusting screw - identified by M7 thread
500 F, L and R
Required: 4
rocker arm - identify by M6 thread
500 N, D and F
Required: 4
rocker arm - identified by M7 thread
500 F, L and R
Required: 4
rocker shaft
500 N, D, F, L und R
Required: 2
+0.05 mm oversize
500 N, D, F, L and R
Required: 4
+0.10 mm oversize
500 N, D, F, L and R
Required: 4
for valves with single groove valve stem
500 N, D, F, L and R
Required: 8
for exhaust valves with triple groove valve stem
500 R
Required: 8
upper, OE specification
500 N, D, F, L and R
Required: 4
upper, uprated aluminium variant
500 N, D, F, L and R
Required: 4
lower, OE specification
500 N, D, F, L and R
Required: 4
inner spring for inlet and exhaust valve with single groove valve stem
500 F, L and R
Required: 4
outer spring for inlet and exhaust valve
500 F, L and R
Required: 4
outer spring for exhaust valve with triple groove valve stem
500 R
Required: 2
with 32 mm head diameter and valve stem with single groove
500 D, F, L and R
Required: 2
with 28 mm head diameter and valve stem with single groove
500 D, F, L and R
Required: 2
with 28 mm head diameter and valve stem with triple groove
500 R
Required: 2
inlet and exhaust valve
500 N, D, F, L and R
Required: 4
for inlet and exhaust valves - standard size with 13.07 mm outer diameter. Bronce type
500 N, D, F and L
Required: 4
for inlet and exhaust valves - oversize with 13.27 mm outer diameter. Bronce type
500 N, D, F and L
Required: 4
for inlet and exhaust valves - standard size with 14.06 mm outer diameter. Steel type
500 R
Required: 4
for inlet and exhaust valves - oversize with 14.27 mm outer diameter. Steel type
500 R
Required: 4
for rocker shaft oil feed
500 N, D, F, L and R
Required: 1
for push rod, fixed version
500 N, D, F, L and R
Required: 5
for push rod, version with flexible ends
500 N, D, F, L and R
Required: 5
for push rod conduit - 2 mm thick
500 N, D, F, L and R
Required: 10
for push rod conduit - 10 mm thick
500 N, D, F, L and R
Required: 10
with rocker arms and pedestals assembly
500 N, D, F, L and R
Required: 1
oil filler cap
500 N and D
Required: 1
inside breather hose
500 N, D, F, L and R
Required: 1
cylinder head - 8 piece kit plus with nuts and washers - bolt length: 210 mm
500 N, D, F, L and R
Required: 1
