Gearbox - outer (1957-75)
gearbox to engine - length: 68 mm
500 N, D, F, L and R
Required: 2
gearbox to engine - length: 62 mm
500 N, D, F, L and R
Required: 2
retaining engine to gearbox
500 N, D, F, L and R
Required: 4
retaining engine to gearbox
500 N, D, F, L and R
Required: 4
gearbox housing
500 N, D, F, L and R
Required: 1
bell housing
500 N, D, F, L und R
Required: 1
retaining flywheel cover
500 N, D, F, L and R
Required: 3
bell housing to gearbox casing - length: 95 mm
500 N, D, F, L and R
Required: 4
bell housing to gearbox casing - length: 85 mm
500 N, D, F, L and R
Required: 2
gearbox to bell housing
500 N, D, F, L and R
Required: 5
gearbox casing - for selector shaft stop
500 N, D, F, L and R
Required: 1
retaining side cover gearbox
500 N, D, F, L and R
Required: 2
retaining side cover gearbox
500 N, D, F, L and R
Required: 2
retaining side cover gearbox
500 N, D, F, L and R
Required: 2
between gearbox casing and gearbox extension
500 N, D, F, L and R
Required: 1
gearbox extension to casing
500 N, D, F, L and R
Required: 2
gearbox extension to casing
500 N, D, F, L and R
Required: 2
between gearbox casing and gearbox extension
500 N, D, F, L and R
Required: 1
retaining end part gearbox
500 N, D, F, L and R
Required: 5
retaining end part gearbox
500 N, D, F, L and R
Required: 2
first motion shaft. Complete unit with oil seal and bronce bearing
500 F, L and R
Required: 1
assembly - new item
500 N, D, F, L and R
Required: 1
assembly - reconditioned, in exchange
500 N, D, F, L and R
Required: 1
500 N, D, F, L and R
Required: 1
retaining gear lever housing
500 N, D, F, L and R
Required: 2
in black plastic - mushroom-shaped version
500 D, F, L and R (1960-75)
Required: 1
in black plastic - round version
500 D, F, L and R (1960-75)
Required: 1
front
500 N, D, F, L and R
Required: 1
connecting gear lever with selctor fork rods
500 N, D, F, L and R
Required: 1
selector shaft
500 N, D, F, L and R
Required: 1
gear lever to selector shaft
500 N, D, F, L and R
Required: 1
and nut - connecting rod to selector shaft
500 N, D, F, L and R
Required: 1
without mounting bracket
500 D, F, L and R
Required: 1
without front oil seal
500 N, D, F, L and R
Required: 1
speedo cable - indntified by 16 teeth
500 F and L
Required: 1
angle drive - set of two pinons with 15 teeth each
500 R
Required: 1
spedpmeter pinion
500 F and L
Required: 1
retaining speedo drive
500 N, D, F, L and R
Required: 1
