Front frame and fittings
for fixing front suspension and steering rack
3.8 and 4.2 Series 1 (1961-67): identify by single fan
Required: 1
for fixing front suspension and steering rack
Series 1.5 and 2 (1967-70): identify by twin fan
Required: 1
for mounting the front subframes
The easy way to purchase all bolts, screws, nuts and washers. They are also available separately and are listed below
Required: 1
securing front sub frame and brake union
3.8 and 4.2 Series 1 OTS to 1E1413 (RHD) and 1E11741 (LHD), FHC to 1E21000 (RHD) and 1E32010 (LHD) (1961-1966)
Required: 1
securing lower front fulcrum blocks, side member and front sub frame of cross member at bottom
Required: 6
securing side member, horn brackets (when fitted) and front sub at bottom
E38 E42 (1)
Required: 4
for rubber seal between bonnet L/H valance and front frame side member
Required: 1
for rubber seal between L/H rear diaphragm and front frame side member
Required: 1
front frame, RH side, made from aluminium
OTS and FHC models (1961-70)
Required: 1
front frame, RH side, made from aluminium
2+2 models only (1966-70)
Required: 1
front frame, LH side, made from aluminium
3.8 Series 1 (1961-64)
Required: 1
front frame, LH side, made from aluminium
4.2 Series 1 and 2 OTS and FHC models (1964-70)
Required: 1
front frame, LH side, made from aluminium
4.2 Series 1 and 2 2+2 models only (1966-70)
Required: 1
securing bracket and stoneguard to front frame
2+2 11 required
Required: 6
securing the rubber seal of the front stoneguard in the engine bay - RH inner strip
Required: 1
securing the rubber seal of the front stoneguard in the engine bay
Required: 1
in the LH front wheel arch
3.8 Series 1 (1961-64)
Required: 1
L/H, with 3 creases
4.2 Series 1 und 1.5 (1968-67)
Required: 1
L/H, with 2 creases
4.2 Series 2 (1968-70)
Required: 1
securing the rubber seal of the front stoneguard in the engine bay - LH inner strip
Required: 1
securing the rubber seal of the front stoneguard in the engine bay
Required: 1
retaining mudshields to front frame and sill end plate
Required: 10
with mesh - bright zinc plated and sove enamel
E-Type 3.8 and 4.2 Series 1 plus 4.2 Series 1.5 (1961-68): OTS to 1E2184 and 1E18368, FHC to 1E21959 and 1E35815, 2+2 to 1E51379 and 1E79222
Required: 1
with mesh - reproduction in aluminium
E-Type 3.8 and 4.2 Series 1 plus 4.2 Series 1.5 (1961-68): OTS to 1E2184 and 1E18368, FHC to 1E21959 and 1E35815, 2+2 to 1E51379 and 1E79222
Required: 1
with mesh - bright zinc plated and sove enamel
E-Type 4.2 Series 2 (1968-70): OTS models from 1R1001 and 1R7001, FHC models from 1R20001 and 1R25001, 2+2 models from 1R35001 and 1R40001
Required: 1
