Inner body repair panels, rear section - 3.8 an 4.2 Series 1 and 2 OTS (1962-70)
complete square panel for LH and RH footwell
3.8 Series 1 (1961-64)
Required: 1
complete slant panel for LH and RH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
in RH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
in LH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
floor to RH side frame - two piece set
Required: 1
floor to LH side frame - two piece set
Required: 1
above rear suspension. Variant with cut-out for direct access to rear brake calipers
Required: 1
above rear suspension. Variant without cut-out for direct access to rear brake calipers
Required: 1
RH. Incorporates RH mounting for hood sticks
Required: 1
LH. Incorporates RH mounting for hood sticks
Required: 1
fuel pump - welded to wheel arch
4.2 Series 1 OTS from 1E1001 (RHD) and from 1E10001 (LHD) (1964)
Required: 1
with inner sills, cross member, propshaft tunnel and rear upper floor panel
3.8 except side hinge flat floor models (1962-64): OTS from 850358 to 850943 and from 876382 to 881887
Required: 1
with inner sills, cross member, propshaft tunnel and rear upper floor panel
4.2 Series 1 and 2 (1964-70): OTS from 1E1001 and 1E10001
Required: 1
