Inner body repair panels, rear section - 3.8 and 4.2 Series 1 and 2 FHC (1962-70)
complete square panel for LH and RH footwell
3.8 Series 1 (1961-64)
Required: 1
complete slant panel for LH and RH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
in RH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
in LH footwell
4.2 Series 1 and 2 (1964-70)
Required: 1
floor to RH side frame - two piece set
Required: 1
floor to LH side frame - two piece set
Required: 1
above rear suspension. Variant with cut-out for direct access to rear brake calipers
Required: 1
above rear suspension. Variant without cut-out for direct access to rear brake calipers
Required: 1
RH rear wheel arch - outer forward section
Required: 1
LH rear wheel arch - outer forward section
Required: 1
side panel RH, inside on wheel arch
Required: 1
side panel LH, inside on wheel arch
Required: 1
fuel pump - welded to wheel arch
4.2 Series 1 FHC from 1E20001 (RHD) and from 1E30001(LHD) (1964)
Required: 1
with inner sills, cross member, propshaft tunnel and rear upper floor panel
3.8 except side hinge flat floor models (1962-64): FHC from 860176 to 861799 and from 885502 to 890873
Required: 1
with inner sills, cross member, propshaft tunnel and rear upper floor panel
4.2 Series 1 and 2 (1964-70): FHC from 1E20001 and 1E30001
Required: 1
