Front brake 4.2 Series 2
RH front. Original caliper with 54 and 38 mm pistons - reconditioned, in exchange
OE E-Type specification - identify by 54 and 38 mm piston diameter
Required: 1
LH front. Original caliper with 54 and 38 mm pistons - reconditioned, in exchange
OE E-Type specification - identify by 54 and 38 mm piston diameter
Required: 1
RH front - new caliper with 57 and 40 mm pistons and two mountng bolts
Jaguar XJ specification
Required: 1
LH front - new caliper with 54 and 38 mm pistons and two mountng bolts
Jaguar XJ specification
Required: 1
retaining rbrake caliper and dust shield to axle carrier
Required: 4
retaining rbrake caliper and dust shield to axle carrier
Required: 1
front - M1144 specification. Identification: 3 piston caliper
Required: 1
front brake pads. Contents: 4 retaining pins, 4 securing clips, 4 spring clips
Required: 1
front brake caliper. Outer piston with 38 mm diameter, made from stainless steel
Required: 4
front brake caliper. Outer piston with 38 mm diameter, black anodised
Required: 4
front brake caliper. Inner piston with 54 mm diameter and small groove, made from stainless steel
Required: 2
front brake caliper. Inner piston with 54 mm diameter and small groove, black anodised
Required: 2
front. This kit services one original Girling caliper
Fits to original E-Type calipers
Required: 2
front. This kit services one caliper
for Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 2
front
Required: 2