Rear brake 4.2 Series 2
complete with hand brake mechanism, RH rear - new item
Required: 1
complete with hand brake mechanism, LH rear - new item
Required: 1
LH rear brake caliper to differential - used item
Required: 1
RH rear brake caliper to differential - used item
Required: 1
rear - M1802 (formerly M1144) specification
Required: 1
front brake pads. Contents: 4 retaining pins, 4 securing clips, 4 spring clips
Required: 1
rear brake caliper - black anodised. Identify by 43 mm diameter
Fits to original E-Type calipers
Required: 4
rear brake caliper - stainless steel. Identify by 43 mm diameter
Fits to original E-Type calipers
Required: 4
rear brake caliper - black anodised. Identified by 43 mm diameter
for models fitted with Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 4
rear brake caliper - stainless steel. Identified by 43 mm diameter
for models fitted with Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 4
rear brake caliper - chromed. Identified by 43 mm diameter
for models fitted with Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 4
rear. This kit services one caliper
Fits to original E-Type calipers
Required: 2
rear, OE quality. This kit services both calipers
Fits to original E-Type calipers
Required: 1
rear. This kit services one caliper
Vehicles fitted with Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 2
rear. This kit services both calipers
Vehicles fitted with Jaguar XJ type brake calipers. Some Series 2 rear calipers supersede to the XJ type. The pistons are the same size, but the sealing arrangement is slightly different
Required: 1
head pre drilled for lock wire. Brake caliper to differential
Required: 4
rear brake caliper bridge - bended two piece set in steel
Required: 2
handbrake operating lever - inner
Required: 2
handbrake operating lever - outer
Required: 2
securing cover to handbrake operating lever
Required: 2
handbrake pads - RH inner
Required: 1
handbrake pads - LH inner
Required: 1
handbrake pads - LH outer
Required: 1
rear. Identify by 264 mm diameter - supplied in pairs
Required: 1