Dashboard 4.2 Series 1.5 and 2 2+2 (1967-1970)
dashboard cover - forward section on windscreen frame
Required: 1
to cover the area between dashboard and windscreen frame
Required: 1
this black plasic cover is moulded perfectly to match clean at your existing dashboard
Required: 1
for centre demister nozzle in dashboard
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
dashboard, outer section, RH
Required: 1
dashboard, outer section, LH
Required: 1
Required: 1
RH, LHD models
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
RH, LHD models
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
RH, RHD models
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
RH, RHD models
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
LH, LHD models
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
LH section on LHD models
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
LH, RHD models
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
LH section on RHD models
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
grab handle at side of dashboard - stainless steel reproduction
Required: 2
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
Required: 2
under dashboard - 3-piece black millboard set for RHD models without air conditioning
Required: 1
under dashboard - 3-piece black millboard set for LHD models without air conditioning
Required: 1
for demister nozzles in dashboard - five piece kit in black
Required: 1
under dashboard, RH
LHD models with air condition
Required: 1
under dashboard, LH
LHD models with air condition
Required: 1
tray liner, RH
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
tray liner, RH
4.2 Series 2 2+2 with air conditioning from 1R40001 (LHD) (1968-70)
Required: 1
RH tray liner
4.2 Series 2 2+2 without air conditioning from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
tray liner, LH
4.2 1.5 2+2 Series from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
LH tray liner
4.2 Series 2 2+2 without air conditioning from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
tray liner, LH
4.2 Series 2 2+2 with air conditioning from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
Required: 1
frame
4.2 Series 1.5 2+2 from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
frame
4.2 Series 2 2+2 from 1R35001 (RHD) and 1R40001 (LHD) (1968-70)
retaining blanging plate to radio console
Required: 2
retaining blanging plate to radio console
Required: 2
'Leaping Cat' on ashtray. Length approx. 30 mm, comes with stud and nut assembly
Required: 1
chromed - required when radio is not fitted
Required: 1
mild steel
Required: 1
remode control
Required: 1
for gear lever gaiter. Black plastic reproduction
Required: 1
