Distributor and ignition coil - 4.2 Series 1 and 2 (1964-70)

22D6 type with top entry cap, serial number: 41060 - reconditioned, in exchange

4.2 Series 1 and 2 European models (1964-70)

22D6 type with top entry cap and no vacuum unit, serial number: 41207 - reconditioned, in exchange

4.2 Series 1.5 and 2 USA and Canada to engine number 7R.7973 (OTS/FHC), 7R.38579 (2+2). Also installed on 7R.7805 (OTS/FHC) (1966-69)

22D6 type with top entry cap, serial number: 41322 - reconditioned, in exchange

4.2 Series 2 USA and Canada models with manual transmission (1969-70): OTS and FHC from engine number 7R7974, 2+2 from engine no. 7R38580. Also installed on OTS resp. FHC with engine no. 7R7506

exchange. 22D6 type, top entry

4.2 Series 2 with automatic transmission USA and Canada 2+2 models from engine no. 7R.38580 (1969-70)

for Lucas 22D6 top entry distributor. Identified by acorn nuts to fix ignition leads and side gap

with spring - inside Lucas 22D and 25D distributor cap

for Lucas 22D6 distributors

improved version for Lucas 22D6, 25D6, DMBZ6 and DVX6A distributors. Please note: distributor rotation anti-clockwise

for Lucas 22D6 distributor

for Lucas 22D6 distributor

for Lucas DM2, DM2P4, 22D, 23D and 25D distributors - two-piece type for distributors with 3 mm long peg on base plate

for Lucas DM2, DM2P4, 22D, 23D and 25D distributor - one-piece type for distributors with a 3 mm long peg on base plate

HT lead to distributor cap

on acorn nut

ignition lead

with vacum code 7-14-8 and push on vacuum pipe. Fits Lucas 25D6 distributor 40887

4.2 Series 1 and 2 European models (1964-70)

for Lucas 22D6 distributor

for Lucas 22D6 distributor

for Lucas 22D66 and DMBZ6A distributor - steel

for Lucas 22D66 and DMBZ6A distributor - alloy

carburettor to Lucas 22D6 distributor

vacuum hose - 90° angled

vacuum hose - straight

not original but may be required in certain applications

with black body, screw-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

with push-in HT lead terminal and approx. 2.8 Ohm primary resistance. Non ballasted type

ignition coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

retaining ignition coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

retaining ignition coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

retaining ignition coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

ignition coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

ignition lead to coil

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

on acorn nut

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

ignition lead

4.2 Series 1 and 1.5 OTS to 1E2184 (RHD) and 1E18368 (LHD), FHC to 1E21959 (RHD) and 1E35815 (LHD), 2+2 to 1E51379 (RHD) and 1E79222 (LHD) (1964-68)

with push-in HT lead terminal and approx. 1.4 Ohm primary resistance. Ballasted type

4.2 Series 2 OTS from 1R1393 and 1R11052, FHC from 1R20486 and 1R27051, 2+2 from 1R35643 and 1R42850 (1969-70)

for ballasted ignition coil. 1.6 Ohm

4.2 Series 2 OTS from 1R1393 and 1R11052, FHC from 1R20486 and 1R27051, 2+2 from 1R35643 and 1R42850 (1969-70)

ignition lead

screwed into cooper ignition lead

retaining ignition coil

retaining ignition coil

retaining ignition coil

ignition coil

Models without balast resistor

retaining ignition coil and balast resistor to bracket

retaining braket on the front cross member

retaining braket on the front cross member

90° angled - plastic reproduction with Champion lettering

in black, for Lucas DMBZ6A and 22D6 distributors. Identified by acorn nuts to fix ignition leads

N11YC

ignition lead

ignition lead

in black

made in red vulcanised fibreboard with the correct rivets and brackets

ignition lead

ignition lead