Instruments and switches 4.2 Series 1.5 and Series 2 (1967-70)
electrical auxiliary gauge BV2202/00 with 52 mm diameter. Black dial with white illumination, hanging pointer, flat glass and black bezel. Range: 10-13-16 Volts
Required: 1
BF2222/00 - new item. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Required: 1
BF2222/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range: E-1/4-1/2-3/4-F
Required: 1
PE2303/00 - new item for negative earthed cars. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
PE2303/00 - reconditioned, in exchange. Black dial with white illumination and clear glass, black bezel, range 0-20-40-60 in lbs/in²
Required: 1
BT2200/09 - new item. Black dial with white illumination and clear glass, black bezel, range: 30-70-110°C
Required: 1
CET3201/00 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel
Required: 1
CTE3107/01 - reconditioned, in exchange. Diameter 60mm. Black dial with white illumination and clear glass, black bezel - reconditioned. This item is sold on an exchange basis
Required: 1
electronic rev counter RVI4612/00 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Required: 1
electronic rev counter RVI4614/01 with 5" diameter for cars with negative earth. Black dial with white printing and flat glass, black bezel, range: 0-6000 RPM - reconditioned, in exchange
Required: 1
model: SN6332/00, range: 0-160 MP/H, turns: 1312, final ratio: 3.54:1 - new item
Required: 1
model: SN6332/01, range: 0-160 MP/H, turns: 1312, final ratio: 3.54:1 - reconditioned, in exchange
Required: 1
model: SN6332/02, range: 0-260 KP/H, turns: 760, final ratio: 3.31:1 - new item
Required: 1
model: SN6332/02, range: 0-260 KP/H, turns: 760, final ratio: 3.31:1 - reconditioned, in exchange
Required: 1
model: SN6332/03, range: 0-260 KP/H, turns: 820, final ratio: 3.54:1 - new item
Required: 1
model: SN6332/03, range: 0-260 KP/H, turns: 820, final ratio: 3.54:1 - reconditioned, in exchange
Required: 1
model: SN6332/05, range: 0-260 KP/H, turns: 700, final ratio: 3.07:1 - reconditioned, in exchange
Required: 1
SN6332/06 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.31:1 - reconditioned. This item is sold on an exchange basis
Required: 1
SN6332/07 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 2.88:1
Required: 1
SN6332/08 - reconditioned, in exchange. Range: 0-160 MP/H, final ratio: 3.07:1
Required: 1
please note: Use this part no., if you wish to have a speedo conversion to KP/H in addition to your reconditioning. Please add also the final ratio and the tyre size from your car
Required: 1
lighting instruments. All except tachometer
for bulbs with BA9s bayonet base - variant with screw connection for single wire
notes fuses
Required: 1
with lug for plug contact
Required: 1
reproduction of the Lucas 4FJ type for 2 fuses - variant with lucar terminals
Required: 4
4FJ type for 2 fuses - variant with lucar terminals
Required: 4
on instrument console
Required: 1
resistor
Required: 1
retaining cowl
Required: 2
with 66" length. For LHD models with manual transmission
OTS and FHC
Required: 1
with 50" length. For RHD models with manual transmission
OTS and FHC
Required: 1
2+2 LHD models with manual transmission
Required: 1
2+2 RHD models with manual transmission
Required: 1
with 68" length
2+2 LHD models with automatic transmission
Required: 1
with 64" length for RHD models
2+2 RHD models with automatic transmission
Required: 1
warning lamp
Required: 1
warning lamp
Required: 1
hazard warning
Required: 1
in red with chrome bezel - hazard warning and brake fluid level
Required: 1
for warning lamp - hand brake and brake fluid level
Required: 1
heater control with nameplate - Illuminated variant
Required: 1
"Choke". complete unit with suround and bulb holder. Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
"Choke". Supplied with surround assembly. Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
"Choke" for Illuminated variant
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
choke knob
4.2 Series 1.5 and 2 all (1967-70), Series 2 LHD OTS to 1R7747 FHC from 1R25430 and 2+2 from 1R40433 (1967-68)
Required: 1
"Cold/Hot/Run", for choke, metal, not illuminated
4.2 Series 2 LHD OTS from 1R7748 FHC from 1R25431 and 2+2 from 1R40434 (1969-70)
Required: 1
with 'Choke' lettering - for vehicles with Zentih Stromberg carburettors
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
"Choke"
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke lever
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivot bolt
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivot bolt
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining shifting plate
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining base plate choke lever to dash board
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
outer choke cable
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
under pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining pivor jaw
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
choke cable retaining
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining trunnion
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
retaining trunnion
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
clamping choke cable
4.2 Series 1.5 USA and Canada models from OTS from 1E15980, FHC from 1E34583 and 2+2 from 1E77709 (1967-1968), all Series 2 (1968-1970)
Required: 1
assambly - for individual parts of the choke unit see chapter 14.11
4.2 Series 1.5 except USA and Canada OTS from 1E1864 to 1E2184 (RHD) and from 1E15889 to 1E18368 (LHD), FHC from 1E21584 to 1E21959 (RHD) and from 1E34250 to 1E35815 (LHD), 2+2 from 1E50975 to 1E51379 (RHD) and from 1E77645 to 1E79222 (LHD) (1967-68)
Required: 1
4.2 Series 1.5 and Series 2 USA and Canada OTS from 1E15889, FHC from 1E34250 (1967-70), 2+2 from 1E77645 to 1E79222 (1967-1968)
Required: 1
4.2 Series 2 USA and Canada 2+2 from 1R40001 (1968-70)
Required: 1
choke - two piece kit
4.2 Series 1.5 and 2 except USA and Canada models (1967-70): OTS from 1E1864 and 1E15889, FHC from 1E21584 and 1E34250
Required: 1
windscreen wiper - two speed switch with 4 spade connectors
Required: 1
retaining swich plinth
Required: 4
indicator, dipper lane change, headlamp flash and horn
Required: 1
stalk indicator
Required: 1
"stop" knob
Required: 1
with barrel and two keys
Vehicles without steering lock
Required: 1
for original steering lock - characteristic: 35 mm diameter, 7 Lucar connections, no loom
Required: 1
€789.99
