Cylinder head 4.2 litre
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 1 to Serie 2 to engine no. 7R1914 (OTS/FHC) and 7R35388 (2+2)
Required: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Series 2 from engine no. 7R1915 (OTS/FHC) and 7R35389 (2+2)
Required: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Required: 16
retaining cylinder head to front timing cover and cylinder block
Required: 4
exhaust manifold, stainless steel
Series 1 to engine no. 7E6332
Required: 13
exhaust manifold, stainless steel
Series 1 from engine no. 7E6333, all 2+2
Required: 11
stainless steel
Serise 1 from engine no. 7E6333, all 2+2
Required: 5
7/16" - galvanised D-shaped washer for cylinder head dome nut
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
chromed. Securing rocker covers and cylinder head
Required: 26
chromed. Securing rocker covers and cylinder head
Required: 1
securing rocker cover
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2)
Required: 2
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Required: 1
set with one inner and one outer spring
Required: 12
top, for inlet valve and exhaust valve - aftermarket
Required: 12
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Required: 6
inlet valve +0.003" (1st oversize). Steel type
Required: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Required: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Required: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Required: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Required: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Required: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Required: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Required: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Required: 6
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
Required: 1
exhaust, hardened, semi finished. For lead free applications
Required: 1
cam follower - diameter: 41.75 mm. Reproduction
Alternatives
Required: 12
long skirt version with 1.3/8" original diameter and 1" total height
Required: 12
with 1.3/8" original diameter and 7/8" total height
Required: 12
aftermarket with 1.3/8" original diameter and 7/8" total height
Required: 12
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
Required: 1
tachometer - on inlet camshaft
Series 1 and 1.5 with engine no. 7E
Required: 1
tachometer drive
Series 1 and 1.5 with engine no. 7E
Required: 1
tachometer drive - nylon reproduction
Series 1 and 1.5 with engine no. 7E
Required: 1
drive dog to tachometer drive adaptor
Series 1 and 1.5 with engine no. 7E
Required: 1
internal star
Series 1 and 1.5 with engine no. 7E
Required: 3
generator
Series 1 and 1.5 with engine no. 7E
Required: 3
inlet cam cover
Serie 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 2
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 2
inlet cam shaft
Series 2 from engien no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 1
Series 2 from engine no.7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 1
RH - aluminium. Feature: slot for electric tachometer drive
Series 1 and 1.5 with engine no. 7E
Required: 1
LH - aluminium
Series I from engine no. 7E1001 to 7E2895
Required: 1
LH - aluminium
Series I from engine no. 7E2896
Required: 1
for LH smooth rocker cover. Made of polished aluminium with 68 mm diameter
Series 1 and 1.5 with engine no. 7E
Required: 1
Series 2 from engine no. 7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 1
oil filler cap
Series 1to engine no. 7E2895 (OTS/FHC)
Required: 1
oil filler cap
Series 1 from engine no. 7E2896 (OTS/FHC), all 2+2
Required: 1
engine breather, 90° angled
Series 1 and 1.5 with engine no. 7E
Required: 1
engine breather - 78 cm long
Series 1 and 1.5 with engine no. 7E
Required: 1
engine breather - 78 cm long
Series 2 from 7R1001 (OTS/FHC) and 7R35001 (2+2)
Required: 2
4.2 to October 1968: OTS and FHC models to engine no. 7R1914 plus 2+2 models to 7R35388
Required: 1
made from high quality Cometic CFM material. Bore size: 3.660", built in thickness: 0.59"
4.2 to October 1968: OTS and FHC models to engine no. 7R1914 plus 2+2 models to 7R35388
Required: 1
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Required: 1
made from high quality composite material. Bore size: 93.50 mm + 0.5 mm, thickness: 0.64", built in thickness: 0.61"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Required: 1
made from high quality Cometic CFM material. Bore size: 3.660", built in thickness: 0.59"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Required: 1
competition MLS construction for high compression engines. Max bore size: 3.660", built in thickness: 0.051"
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Required: 1
aftermarket
4.2 from October 1968: OTS and FHC models from engine no. 7R1915 and 2+2 models from 7R35388
Required: 1
with high quality Cometic CFM head gasket. Bore size: 92.964 mmm, thickness: 0.64", built in thickness: 0.59"
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388 (October 1968)
Required: 1
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388 (October 1968)
Required: 1
4.2 Series 1 and 1.5 (1964-68) plus 4.2 Series 2 OTS and FHC models to engine no. 7R1914 and 2+2 models to engine no. 7R35388 (October 1968)
Required: 1
with high quality composite head gasket. Bore size: 93.50 mm, thickness: 0.64", built in thickness: 0.61"
4.2 Series 2 OTS and FHC models from engine no. 7R1915 plus 2+2 models from engine no. 7R35388 (October 1968)
Required: 1
4.2 Series 2 OTS and FHC models from engine no. 7R1915 plus 2+2 models from engine no. 7R35388 (October 1968)
Required: 1
dipstick
4.2 Series 1 plus 4.2 Series 2 to engine no. 7R2082 (OTS and FHC) and 7R38580 (2+2)
Required: 1
dipstick - reproduction in stainless steel
4.2 Series 1 plus 4.2 Series 2 to engine no. 7R2082 (OTS and FHC) and 7R38580 (2+2)
Required: 1
90° angled - plastic reproduction with Champion lettering
Required: 1
in black, for Lucas DMBZ6A and 22D6 distributors. Identified by acorn nuts to fix ignition leads
Required: 1
made in red vulcanised fibreboard with the correct rivets and brackets
Required: 6
256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible
Specification: 4 bolt fixing
Required: 1
inlet - XJ6 version, can be fixed with 2 and 4 bolts
Required: 1
exhaust - XJ6 version, can be fixed with 2 and 4 bolts
Required: 1
inlet and exhaust manifold, 34 studs
short studs only
Required: 1
on cylinder head
4.2 Series 1 OTS to 1E1252 and 1E11048, FHC to 1E20691 and 1E31077 (1961-65). Except USA and Canada models
Required: 1
on cylinder head
4.2 Series 1 OTS from 1E1253 and 1E11049, FHC from 1E20692 and 1E31078 (1965) and all USA and Canada exported vehicles
Required: 1
raw aluminium - set of two. 'D' Type variant with breather for cars fitted with electric tachometer. Features: Recess on LH exhaust cover: 29 mm, recess on RH inlet cover: 46 mm
3.8 and 4.2 Series 1, Series 2 to engne no. OTS/FHC to 7R1914 also 2+2 to 7R35387 (1961-1968)
Required: 1
raw aluminium - set of two.For cars fitted with electric tachometer. Features: Recess on LH exhaust cover: 29 mm, recess on RH inlet cover: 46 mm
3.8 and 4.2 Series 1, Series 2 to engine no. OTS/FHC to 7R1914 also 2+2 to 7R35387 (1961-1968)
Required: 1
polished aluminium - set of two.For cars fitted with electric tachometer. Features: Recess on LH exhaust cover: 29 mm, recess on RH inlet cover: 46 mm
3.8 and 4.2 Series 1, Series 2 to engine no. OTS/FHC to 7R1914 also 2+2 to 7R35387 (1961-1968)
Required: 1
