Inlet manifold for models with twin Zenith Stromberg CD175 carburettors
Series 1.5 and Series 2 (USA and Kanada) to engine no. 7R1837 (OTS/FHC) and 7R5329 (2+2) (1967-68)
Required: 1
Series 1.5 and Series 2 (USA and Kanada) from engine no. 7R1838 (OTS/FHC) and 7R35330 (2+2) (1968-70)
Required: 1
inlet manifold - modern composite gasket
Required: 1
inlet manifold - tin
Required: 1
- stainless steel. Retaining inlet manifold to cylinder head
Required: 18
thermostat housing - modern high tech cometic version
Required: 1
retaining thermost housing to inlet manifold - short
Required: 1
82° C - Version with bypass and vibrating pin
Required: 1
thermostat housing
Required: 1
between induction housing and inlet manifold
Induction housing to inlet manifold
Required: 2
Induction housing and carburettor to inlet manifold- length: 4.1/4"
Required: 4
induction housing
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2) (1968-70)
Required: 1
between cover and induction housing
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2) (1968-70)
Required: 1
retaining cover to induction housing
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2) (1968-70)
Required: 4
retaining cover to induction housing
Series 2 from engine no. 7R2083 (OTS/FHC) and 7R35463 (2+2) (1968-70)
Required: 4
Series 2 to engine no. 7R1838 (OTS/FHC) and 7R35329 (2+2) (1967-68)
Required: 1
Series 2 from engine no. 7R1839 (OTS/FHC) and 7R35330 (2+2) (1969-70)
Required: 1
heater hose to induction housing - stainless steel
Required: 2
betweeen carburettor and induction housing resp. inlet manifold, thickness: 6 mm
Required: 2
between carburettor and inlet manifold - 1.3/4" inner diameter
Required: 4
inside induction housing on vehicles with Zenith Stromberg carburettors
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69)
Required: 2
inside induction housing on vehicles with Zenith Stromberg carburettors
Series 2 from engine no. 7R7974 (OTS/FHC) and 7R38580 (2+2) (1969-70)
Required: 2
inside induction housing
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69
Required: 2
inside induction housing
Series 2 from engine no. 7R7974 (OTS/FHC) and 7R38580 (2+2) (1969-70)
Required: 2
throttle disc retaining on Zenith Stromberg carburettors
Required: 4
throttle spindle
Required: 2
front position
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69)
Required: 1
rear position
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69)
Required: 1
front position
Series 2 from engine no. 7R7974 (OTS/FHC) and 7R38580 (2+2) (1969-70)
Required: 1
rear position
Series 2 from engine no. 7R7974 (OTS/FHC) and 7R38580 (2+2) (1969-70)
Required: 1
Required: 4
throttle return spring - on front carburettor
Required: 1
throttle return spring - on rear carburettor
Required: 1
throttle disc inside induction housing, front position
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69)
Required: 2
throttle disc inside induction housing, rear position
Series 2 to engine no. 7R7973 (OTS/FHC) and 7R38579 (2+2) (1967-69)
Required: 1
throttle
Series 2 from engine no. 7R7974 (OTS/FHC) and 7R38580 (2+2) (1969-70)
Required: 2
with thread for screw contact
Required: 1
with lug for plug contact
Required: 1
hot air for induction housing
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 1
between hot air duct and induction housing
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 1
retaining hot air duct to induction housing
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 4
retaining hot air duct to preheater housing to exhaust manifold- long
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 2
retaining hot air duct to preheater housing - short
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 2
retaining hot air duct
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 8
retaining hot air duct
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 8
between hot air duct and preheater housing on exhaust manifold
Series 1.5 and 2 OTS from chassic no. 1E15980 to engine no. 7R2082, FHC from chassis no. 1E34583 to engine no. 7R2082 and 2+2 from chassis no. 1E77709 to engine no. 7R35462 (1967-68)
Required: 1