Power steering unit - 4.2 Series 2 (1968-70)
for RHD models - reconditioned, in exchange
Required: 1
for LHD models - reconditioned, in exchange
Required: 1
Adwest power steering rack - feature: steering rack and track rod ends with imperial threads
Required: 1
Required: 1
Required: 1
ball bearing
Required: 1
power steering pinion housing
Required: 1
rack bar
Required: 1
plunger
Required: 1
plunger
Required: 1
retaining screwed plug
Required: 1
spring and plunger
Required: 1
steering
Required: 1
in rack and pinion - please note: this steering rod will be supplied less nut
Required: 2
assembly - including pan, housing, lock tab and tie rod nut adaptor
Required: 2
for steering rod spring - feature: 11.7 mm outer diameter and 2.5 mm thickness
Required: 2
steering rod to rack bar - identified by 2 ears
Required: 2
securing piston on rack
Required: 2
on rack
Required: 1
with 5/8" UNF thread - variant without grease nipple but with a socket for an open-end spanner
Required: 2
with 5/8" UNF thread - variant with grease nipple
Required: 2
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Driver side
Required: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.3/4"
Driver side
Required: 1
retaining rack to rubber mounting - Length: 3/4"
Driver side
Required: 1
retaining rubber mounting, mounting bracket and upper wishbone to front frame - Lengtht: 3"
Passenger side
Required: 1
retaining rubber mounting and mounting bracket to front frame - Length: 1.1/2"
Passenger side
Required: 1
retaining rack to rubber mounting - Length: 3/4"
Passenger side
Required: 1
power steering, driver side
Required: 1
power steering, passenger side
Required: 1
