Cylinder head
on rocker cover with golden 'Jaguar' letters on black surface. Dimensions: 95 x 38 mm
Required: 2
on rocker cover with golden 'Jaguar' domed acrylic letters on black surface. Dimensions: 95 x 38 mm
Required: 2
RH
to engine no.7S3904
RH
from engine no. 7S3905
Required: 1
LH (B-bank)
Required: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Required: 4
RH - exchange. Full recondition fitting of all new valves, springs and guides, new cam bearings.
Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Required: 1
LH - exchange. Full recondition fitting of all new valves, springs and guides, new cam bearings.
Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
Required: 1
exhaust valve +0.003" (1st oversize). Steel type
Required: 12
exhaust valve +0.005" (2nd oversize). Steel type
Required: 12
exhaust valve +0.005" (2nd oversize). Bronze/silicone type
Required: 12
inlet valve +0.003" (1st oversize). Steel type
Required: 12
inlet valve +0.005" (2nd oversize). Steel type
Required: 12
inlet valve +0.005" (2nd oversize). Bronze/silicone type
Required: 12
cylinder head - stover style hexagon nut with 3/8" UNF thread and 9/16" AF spanner size
Required: 24
cylinder head - uprated flange nut with 3/8" UNF thread and 9/16" AF spanner size
Required: 27
chromed dome nut with flat head, 7/16" UNF thread and 3/4" AF spanner size
Required: 28
exhaust, hardened, semi finished. For lead free applications
Required: 12
inlet, hardened, semi finished. For lead free applications
Required: 12
long skirt version with 1.3/8" original diameter and 1" total height
Required: 24
with 1.3/8" original diameter and 7/8" total height
Required: 24
aftermarket with 1.3/8" original diameter and 7/8" total height
Required: 24
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
top, for inlet valve and exhaust valve - aftermarket
Required: 24
made from 214N stainless steel. Diameter: 1.3/8", length: 4.1/2"
Required: 12
made from 214N stainless steel. Head diameter: 1.5/8", length: 115,3 mm
Required: 12
made from 214N stainless steel. Head diameter: 1.5/8" (41,3 mm), length: 115,3 mm
Required: 12
rigid feed pipe from block to cylinder head
to engine no. 7S7377 (1971-73)
Required: 1
rigid feed pipe from block to cylinder head
from engine no. 7S7378 (1973-74)
Required: 1
flexible, steel braided, feed pipe from block to cylinder head
Required: 1
at adaptor oil pressure switch
from engine no 7S7378
Required: 1
oil pressure switch, at cylinder head
from engine no. 7S7378
Required: 1
or warning light in warning lamp cluster
from engine no. 7S7378
Required: 1
chromed. Securing rocker covers and cylinder heads
Required: 1
with high quality Cometic CFM head gaskets with 93 mm bore size and 0.59" built in thickness
Required: 1
