Exterior chrome and badges
chromed, without centre vane - reconditioned, in exchange
Mark II (1959-69)
Centre vane not included
Required: 1
reconditioned, in exchange
Daimler 250 V8 Saloon (1962-69)
Required: 1
on radiator grille - black and red logo with silver 'Jaguar 2.4 litre' lettering
Required: 1
on radiator grille - red logo with silver 'Jaguar 3.4 litre' lettering
Required: 1
on radiator grille - red logo with silver 'Jaguar 3.8 litre' lettering
Required: 1
chrome plated, approx. 20 cm long
Original size
Required: 1
chrome plated with finish in gold. Length: 20 cm
Original size
Required: 1
chrome plated with finish in gold. Length: 12 cm
Required: 1
securing Leaping Cat
may have to be shortened slightly
Required: 2
with nut - bumper retaining. Chromed with 29 mm length
2.4/3.4/3.8
Required: 2
with nut - bumper retaining. Chromed with 35 mm length
Required: 2
mouldings. 160 piece kit with all needed clips and rivets
Required: 1
chromed. Exterior mirror with round head with flat glass and curved stem with spring back feature
Required: 2
chromed with flat glass. Supplied in pairs, perfect for quarter light fitting
Required: 1
chromed with straight mirror base and flat glass
Required: 2
chromed, flat glass, dimensions 115 x 73 mm, total height: 125 mm
Required: 2
exterior - chromed handle for RH front door
Required: 1
exterior - chromed handle for LH front door
Required: 1
chromed. Contains door lock set, boot handle with barrel, cubby lock and igintion tumbler with matched pair of keys
Required: 1
chromed. Contains door lock set with matched pair of keys
Required: 1
boot lock. Comes with button and two keys
Required: 1
front, wide bar - reconditioned, in exchange
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon to chassis no. 1A12497 and 1A20557 (1962-67)
Required: 1
front, wide bar. Stainless steel replacement including overrider
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon to chassis no. 1A12497 and 1A20557 (1962-67)
Required: 1
front - narrow type, chromed. Reconditioned, in exchange
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
front. Variant to fit wide bumper
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon with chassis no. 1A...
Required: 2
RH front - chromed. Variant to fit narrow bumper
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
LH front - chromed. Variant to fit narrow bumper
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
rear, wide bar - reconditioned, in exchange
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon to chassis no. 1A12497 and 1A20557 (1962-67)
Required: 1
rear, wide bar. Stainless steel replacement including overrider
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon to chassis no. 1A12497 and 1A20557 (1962-67)
Required: 1
rear, narrow type - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
RH rear. Variant to fit wide bumper
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon with chassis no. 1A...
Required: 1
LH rear. Variant to fit wide bumper
Mark II 2.4, 3.4 and 3.8 (1959-67) • Daimler 2.5 V8 Saloon with chassis no. 1A...
Required: 1
RH rear. Variant to fit narrow bumper - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
LH rear. Variant to fit narrow bumper - reconditioned. This item is sold on an exchange basis so a core unit surcharge will apply
Mark II 240 and 340 (1967-69) • Daimler V8 2.5 "250" with chassic no. 1K...
Required: 1
manual retractable radio aerial with two sections and adjustable angle for roof mounting. Length: 470 mm, extended length: 800 mm, cable length: 2000 mm
Required: 1