Exhaust system MKII
stainless steel
Mark II (1959-61): 3.4 to 158295 (RHD) and 177749 (LHD), 3.8 to 207227 (RHD) and 219613 (LHD)
Required: 1
stainless steel. Variant with straight thru main silencer
Mark II (1959-61): 3.4 to 158295 (RHD) and 177749 (LHD), 3.8 to 207227 (RHD) and 219613 (LHD)
Required: 1
stainless steel
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
Required: 1
stainless steel. Variant with straight thru main silencer
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
Required: 1
stainless steel, single silencer type. Characteristic: downpipe with flange fitting
Early 2.4 modes to 112354 and 126734
Required: 1
stainless steel, single silencer type. Characteristic: downpipe with cup fitting
Late 2.4 models from 112355 and 126735
Required: 1
28 piece kit with zinc plated exhaust clamps
Mark II 3.4, 3.8, 240 and 340 (1959-69)
Required: 1
28 piece set with stainless steel exhaust clamps
Mark II: 3.4, 3.8, 240 and 340 (1959-67)
Required: 1
17 piece kit with zinc plated exhaust clamps
Mark II 2.4 (1959-67)
Required: 1
exhaust mounting
Late models.Quote chassis no.
Required: 1
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Mark II (1961-69): 2.4 from 112355 and 126735, 3.4 from 158296 and 177750, 3.8 from 230001 and 219614 plus all 240 and 340 models
Required: 2
down pipe to exhaust manifold- inner diameter: 51 mm, total height: 12.5 mm
Mark II (1961-69): 2.4 from 112355 and 126735, 3.4 from 158296 and 177750, 3.8 from 230001 and 219614 plus all 240 and 340 models
Required: 2
'U' shape - for pipes with 2" diameter
3.4/3.8/240/340. 1 required for 2.4
Required: 4
RH side (rear pipe) - stainless steel variant with 57.67" length
Mark II (1959-61): 3.4 to 158295 (RHD) and 177749 (LHD), 3.8 to 207227 (RHD) and 219613 (LHD)
Required: 1
RH side (rear pipe) - stainless steel variant with 57.67" length
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
3.4/3.8/340
Required: 1
down pipe
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
Required: 1
LH side (front pipe) - stainless steel variant with 63.58" length
Mark II (1959-61): 3.4 to 158295 (RHD) and 177749 (LHD), 3.8 to 207227 (RHD) and 219613 (LHD)
Required: 1
LH side (front pipe) - stainless steel variant with 63.58" length
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
Required: 1
down pipe
Mark II (1961-69): 3.4 from 158296 (RHD) and 177750 (LHD), 3.8 from 207228 (RHD) and 219614 (LHD), all 340 models
Required: 1
standard type in stainless steel
Mark II 3.4, 340 and 3.8 (1959-69)
Required: 1
straight thru type in stainless steel
Mark II 3.4, 340 and 3.8 (1959-69)
Required: 1
standard type in mild steel
Mark II 3.4, 3.8 and 340 (1959-69)
Required: 1
stainless steel
Mark II 3.4, 340 and 3.8 (1959-69)
Required: 1
stainless steel
2.4 early models. Identify by flat asbestos down pipe gasket
Required: 1
stainless steel
2.4 late models. Identify by sealing ring for down pipe
Required: 1
rear - stainless steel variant
Mark II 240 (1967-69)
Required: 1
front - stainless steel variant
Mark II 240 (1967-69)
Required: 1
standard type in stainless steel
Mark II 240 (1967-69)
Required: 1
straight thru type in stainless steel
Mark II 240 (1967-69)
Required: 1
standard type in mild steel
Mark II 240 (1967-69)
Required: 1
stainless steel with 2" diameter - 4 piece set for LHD models. This kit will come with adaptor pipes to link to the standard system
Mark II 3.4, 340 and 3.8 LHD models (1959-69)
Required: 1
stainless steel with 2" diameter - 4 piece set for RHD models. This kit will come with adaptor pipes to link to the standard system
Mark II 3.4, 340 and 3.8 RHD models (1959-69)
Required: 1