Inlet manifolds MKII
end of inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 1
water rail to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 8
thermostat housing to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 2
thermostat housing to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 2
thermostat housing to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 2
2.4 (1959-67)
Required: 1
carburettor to inlet manifold
3.4 and 3.8 (1959-67)
Required: 8
carburettor to inlet manifold
2.4 (1959-67)
Required: 4
heater hose to inlet manifold - galvanized with 3/8" BSPT thread
2.4, 3.4 and 3.8 (1959-67)
Required: 1
for heater hose adaptor
2.4, 3.4 and 3.8 (1959-67)
Required: 1
in inlet manifold - starting pipe to thermo carburettor
3.4 and 3.8 (1959-67)
Required: 1
for choke solenoid
2.4, 3.4 and 3.8 (1959-67)
Required: 1
securing otter switch to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 3
securing otter switsch to inlet manifold
2.4, 3.4 and 3.8 (1959-67)
Required: 3
thermostat housing and thermostat cover - length: 4.1/4"
240 and 340 (1967-69)
Required: 1
thermostat housing - length: 1.3/8"
240 and 340 (1967-69)
Required: 2
thermostat cover - length: 1.3/8"
240 and 340 (1967-69)
Required: 2
82° C - Version with bypass and vibrating pin
240 and 340 (1967-69)
Required: 1
240 and 340 (1967-69)
Required: 1
heater hose to inlet manifold - galvanized with 3/8" BSPT thread
240 and 340 (1967-69)
Required: 1
for heater hose adaptor
240 and 340 (1967-69)
Required: 1
securing otter switch to inlet manifold
340 (1967-69)
Required: 3
securing otter switch to inlet manifold
340 (1967-69)
Required: 3
connecting manifold and carburettor starting pipes
240 and 340 (1967-69)
Required: 4
