Crankshaft
upper bolt
Required: 1
timing chain tensioner
Required: 1
upper and lower - uprated double row endless chain with 180 pitches
Alternatives
Required: 1
upper and lower - aftermarket chain with 180 pitches
Required: 1
- for distributor drive
Required: 1
auxiliary shaft - 3 piece set
Required: 1
with Goetze liner assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJ12 Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Required: 12
with liners assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Required: 1
with liner assembly, standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 11.5:1 - HE engines (from September 1981)
XJ12 from VIN...326520 to 487641 (1981-92)
Required: 12
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJ12 Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Required: 12
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Required: 1
standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 12.5:1
XJ12 from VIN...326520 to 487641 (1981-92)
Required: 1
standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 11.5:1 - HE engines (from September 1981)
XJ12 from VIN...326520 to 487641 (1981-92)
Required: 12
for one piston. Standard size for 3 ring piston (2 compression rings, 1 oil ring)
To September 1981 (not HE engines)
Required: 12
standard size - complete car set
From September 1981 (HE engines only)
Required: 1
standard size - for single piston
From September 1981 (HE engines only)
Required: 12
standard size - complete car set
Fits all makes of pistons
Required: 1
fully finished grade 'A' liner with -0.002". Dimensions: 90.0 mm inner diameter and 143.8 mm total height
XJ12 Series I and II, Series III to engine no. 7P42299 (to September 1981, i.e. not HE engines)
Required: 12
XJ12 Series I, Series II to engine no. 7P27699 (1972-75)
Required: 24
XJ12 Series II from engine no. 7P27700 and all Series III (1975-92)
Required: 24
standard size - shaft diameter: 2.30"
Required: 1
+0.030" - shaft diameter: 2.30"
Required: 1
Required: 2
crankshaft - reconditioned, in exchange
To engine no. 7P59902
Required: 1
crankshaft - exchange
From engine no. 7P59903 to 7P63783
Required: 1
crankshaft - exchange
From engine no. 7P63784
Required: 1
crankshaft
Required: 1
oil pump
XJ12 Series I, II and III to VIN...431601 (1972-85)
Required: 1
oil pump
XJ12 Series III from VIN...431602 (1985-92)
Required: 1
without bearings - new item
Required: 1
standard size - shaft diameter: 3.001"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
new item for vehicles with automatic transmission - identify by 160 teeth ring gear
To engine no. 7P32897
Required: 1
new item for vehicles with automatic transmission - identify by 160 teeth ring gear
From engine no. 7P32898
Required: 1
drive plate - for vehicles with automatic transmission
Required: 1
drive plate to converter
From engine no. 7P32898 to 7P40652
Required: 6
Classic XL20W-50
Required: 3
Content: 5 l (€9.80 / 1 l)
SAE 15W-40
Required: 3
Content: 5 l (€8.40 / 1 l)
€421.90
€197.99
