Automatic gearbox Borg Warner model 12 - outer
including torque converter, model: BW12-TR1, identification code: 022 (blue plate) - reconditioned, in exchange
XJ12 Series I plus Series II Carburettor models to engine no. 7P25000 (1972-75)
Required: 1
including torque converter, model: BW12-TR2 - reconditioned, in exchange
XJ12 Series II fuel injection models from engine no. 7P25001 to 7P32897 (1975-77)
Required: 1
Required: 1
Required: 2
Required: 2
gearbox to oil cooler
Required: 1
gearbox to oil cooler
Required: 1
oil pipe
Required: 1
oil pipe
Required: 1
oil pipe
Required: 1
with breather
Required: 1
made from nitrile rubber. Inner diameter: 5/16", outer diameter: 1/2", cotton braided
Required: 1
breather hose to gearbox
Required: 1
oil pipe
Required: 2
Required: 2
If not available use oil seal and o-ring set 201659
Required: 1
oil pipe
Required: 1
rear brake band
Required: 1
Required: 1
front pump to casing
If not available use oil seal and o-ring set 201659
Required: 1
front
Required: 1
between front and middle gearbox casing
If not available use gasket set 201966
Required: 1
securing cover plate
Required: 2
sealing governor inspection aperture
Required: 1
cover plate
Required: 1
To 2E3922, 2R53929, 2P1870, 2P50069, 2K2196, 2K50081, 2G1014, 2G50036, 2F1003 and 2F50000
Required: 1
middle
Required: 1
Required: 2
between gearbox casing and extension
If not available use gasket set 201966
Required: 1
Required: 1
speedometer
To 2E3922, 2R53929, 2P1870, 2P50069, 2K2196, 2K50081, 2G1014, 2G50036, 2F1003 and 2F50000
Required: 1
speedometer
From 2E3923, 2R53930, 2P1871, 2P50070, 2K2197, 2K50082, 2G1015, 2G50037, 2F1004 and 2F50001
Required: 1
rear extension
Required: 1
If not available use oil seal and o-ring set 201659
Required: 1
Required: 1
with 15 teeth - for vehicles with BW12 automatic transmission
To 2E3922, 2R53929, 2P1870, 2P50069, 2K2196, 2K50081, 2G1014, 2G50036, 2F1003 and 2F50000
Required: 1
speedometer - 3.31:1 axle ratio
From 2E3923, 2R53930, 2P1871, 2P50070, 2K2197, 2K50082, 2G1015, 2G50037, 2F1004 and 2F50001
Required: 1
speedometer - 12 teeth - BW12. Use with 3.07:1 axle ratio
From 2E3923, 2R53930, 2P1871, 2P50070, 2K2197, 2K50082, 2G1015, 2G50037, 2F1004 and 2F50001
Required: 1
manual valve lever shaft
If not available use oil seal and O-ring set 201659
Required: 1
Required: 1
for pressure test
Required: 1
Required: 1
retaining lever to shaft
Required: 1
torsion lever
Required: 1
Required: 1
Required: 1
Required: 1
Required: 1
with spring, toggle lever
Required: 1
Required: 1
Required: 1
Required: 1
retaining toggle pin
Required: 1
toggle link
Required: 1
Required: 1
toggle lever
Required: 1
for BW8 and BW12 automatic tranmissions. Uprated Duraprene variant
Required: 1
for BW12 automatic transmission - used item
Required: 1
for BW12 automatic transmission. Uprated aluminium version
Required: 1
retaining oil sump
Series I, Series II to engine no. 7P7000
Required: 14
retaining oil sump
Series II from engine no. 7P7001
Required: 11
retaining oil sump
Series II from engine no. 7P7001
Required: 3
