Automatic gearbox GM400 - outer
exchange, including torque converter
Series II from engine no. 7P32898, Series III to 7P45000 - identification code: ZA
Required: 1
exchange, including torque converter
Series III from engine no. 7P45001 - identification code: ZV
Required: 1
GM400 with identification code ZVA, including torque converter - reconditioned, in exchange
XJ12 Series III from engine no. 7P56895 to VIN...482169 (1986-88)
Required: 1
GM400 with identification code ZXA, including torque converter - reconditioned, in exchange
XJ12 Series III from VIN...482170 (1988-92)
Required: 1
for GM400 automatic transmission - reconditioned, in exchange
Series II
Required: 1
for GM400 automatic transmission - reconditioned, in exchange
Series III
Required: 1
bell housing, bottom
Required: 1
gearbox breather
Required: 1
kick down switch - variant with two spade connections, works the same as OE just use one prong instead of both. For vehicles with GM400 automatic transmission
Required: 1
Required: 6
If not available use gasket and seal kit 201803
Required: 1
If not available use gasket and seal kit 201803
Required: 1
parking
Required: 1
Required: 1
Required: 2
on oil strainer - used item for GM400 automatic transmissions
Required: 1
Required: 1
Required: 1
dipstick - lower
Required: 1
upper dipstick tube
Required: 1
automatic transmission - length: 33". Cut to 19" (inlet) and 13" (outlet)
Series II, Series III to VIN...435664 (1977-85)
Required: 1
automatic transmission - upper hose with 21" length
Series III from VIN...435665 (1985-92)
Required: 1
automatic transmission - lower hose with 15" length
Series III from VIN...435665 (1985-92)
Required: 1
gearbox to oil cooler inlet
Required: 1
gearbox to oil cooler outlet
Required: 1
oil pipe
Required: 4
oil pipe
Required: 1
oil pipe
Required: 2
oil pipe
Required: 2
speedometer - 3.31:1 axle ratio
Series II, Series III to engine no. 7P45000
Required: 1
speedometer - 3.07:1 axle ratio
Series II, Series III to engine no. 7P45000
Required: 1
speedometer - 2.88:1 axle ratio
Series III from engine no. 7P45001
Required: 1
speedometer pinion
Required: 1
pinion housing
Required: 1
speedometer pinion housing - GM400 automatic transmission
Required: 1
speedometer pinion housing - GM400 automatic transmission
Required: 1
Hightec ATF 4000
Required: 10
