Exhaust manifold
exhaust manifold to cylinder head - aftermarket gasket with 1.7/16" internal diameter
Required: 12
exhaust manifold to cylinder head - modern hig tech version with 1.7/16" internal diameter
Required: 12
exhaust manifold to cylinder head - internal diameter: 1.9/16"
Required: 12
exhaust to manifold - height: 7/16"
Alternatives
Required: 16
exhaust to manifold - height: 3/8"
Alternatives
Required: 16
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Required: 4
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Required: 4
RH exhaust manifold
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
LH exhaust manifold
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
heat shield to manifold
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 4
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 2
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 2
manifold to head - short
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 2
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 2
manifold to head - long
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 22
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 24
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 24
RH rear
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
LH rear
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
RH front
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
LH front
Series I: USA and Canada to engine no. 7P2326, all other countries to engine no. 7P3818
Required: 1
RH
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
LH
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
heat shield to manifold
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 4
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 4
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 4
manifold to head - short
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 2
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 2
manifold to head - long
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 22
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 24
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 24
RH rear
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
LH rear
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
RH front
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
LH front
Series I: USA and Canada from engine no. 7P2327, all other countries from engine no. 7P3819 - Series II to engine no. 7P25000 (carburettor cars)
Required: 1
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 4
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 4
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 4
for 3/8" pipe
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 8
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 8
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 2
to RH exhaust manifold
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 1
to LH exhaust manifold
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 1
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 2
gas recirculation pipe to exhaust manifold
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 2
Series I: USA and Canada from engine no. 7P2327 - Series II: USA and Canada to engine no. 7P25000 (carburettor cars with gas recirculation system)
Required: 2
Series I: all countries less USA and Canada from engine no. 7P3819 - Series II: all countries less USA and Canada to engine no. 7P25000 (carburettor cars without gas recirculation system)
Required: 2
Series I: all countries less USA and Canada from engine no. 7P3819 - Series II: all countries less USA and Canada to engine no. 7P25000 (carburettor cars without gas recirculation system)
Required: 2
RH
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
LH
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
heat shield to manifold
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 4
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 4
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 4
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 2
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 2
RH rear
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
LH rear
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
RH front
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
LH front
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 1
between manifold and down pipe
Series II from engine no. 7P25001 - Series III (fuel injection cars)
Required: 2
manifold to head
Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)
Required: 24
Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)
Required: 24
Series II from engine no. 7P25001 - Series III to engine no. 7P47586 (characteristic: imperial thread)
Required: 24
manifold to head
Series III from engine no. 7P47587 (characteristic: metric thread)
Required: 24
Series III from engine no. 7P47587 (characteristic: metric thread)
Required: 24
Series III from engine no. 7P47587 (characteristic: metric thread)
Required: 24
manifold to head - with oversize
Allows to re-tap a damaged thread in the manifold
Required: 16
7/16" x 20 UNF - contents: • 1 HSSG standard drill • 1 HSSG hand tap • 1 inserting tool • 1 tang break tool • 10 wire thread inserts "free running", stainless steel (ASIS 304), lenght: 1,5 x D
Content: finishing tap, tang break off tool, pre-wound inserting tool, instructions and 10 thread inserts. Comes in a durable carrying case
Required: 1