Exhaust system - Series II from 1974 to 1976
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Required: 4
down pipe to exhaust manifold - inner diameter: 51 mm, total height: 12.5 mm
Required: 4
down pipe to manifold - height: 7/16"
Alternatives
Required: 16
down pipe to manifold - height: 3/8"
Alternatives
Required: 16
RH - mild steel. Characteristic: 4 stud fixing
Required: 1
RH - stainless steel. Characteristic: 2 stud fixing
this down pipe can be used as an alternative to the original down pipe with 4 studs, as the hole spacing is identical
Required: 1
LH - mild steel. Characteristic: 4 stud fixing
Required: 1
LH - stainless steel. Characteristic: 2 stud fixing
this down pipe can be used as an alternative to the original down pipe with 4 studs, as the hole spacing is identical
Required: 1
RH front
2 door models
- mild steel.
Required: 1
LH front
2 door models
- mild steel.
Required: 1
RH rear
Mild steel.
Required: 1
LH rear
Mild steel.
Required: 1
RH
Mild steel.
Required: 1
exhaust to down pipe - reproduction with 50.7 mm inner diameter, 67.2 mm outer diameter and 26.9 mm total height
Required: 4
centre mounting above rear axle on LH exhaust link pipe
Required: 1
centre mounting above rear axle on RH exhaust link pipe
Required: 1
rear exhaust mounting - in boot floor
Required: 2
RH down pipe
Required: 1
LH down pipe
Required: 1
RH
Required: 1
LH
Required: 1
centre silencer
2 door models
Required: 2
centre silencer
4 door models
Required: 2
rear axle
Required: 1
RH rear silencer
Required: 1
LH rear silencer
Required: 1
Supplied in metres -
Required: 18
black matt
400 ml aerosol
Required: 1
Content: 400 ml (€29.75 / 1000 ml)