SU-HD8 internal carburettor
piston return - paint colour on end coil: red/green
4.2
Required: 2
piston return - paint colour on end coil: blue/black
2.8
Required: 2
with piston
Required: 2
- marked: UM (standard)
4.2 - alternatives
Required: 2
fixed type for rich mixture - marked: OU
4.2
Required: 2
- marked: UVV (standard)
2.8 to engine no. 7G16407
Required: 2
fixed type - marked: UVX
2.8 from engine no. 7G16408
Required: 2
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Required: 4
front carburettor
Required: 1
rear carburettor
Required: 1
idle control - complete kit with spring and washers
Required: 2
idle control
Part of our idle adjusting kit 21204 (ill. 19)
Required: 2
idle adjusting
Part of our idle adjusting kit 21204 (ill. 19)
Required: 2
idle control adjusting
Part of our idle adjusting kit 21204 (ill. 19)
Required: 2
idle control adjusting
Part of our idle adjusting kit 21204 (ill. 19)
Required: 2
jet bearing
Part of our jet bearing kit 3142 (ill. 24)
Required: 2
for jet
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Required: 2
and spring - inside float chamber lid on SU carburettors
Required: 2
auxiliary enrichment (thermo) carburettor to float chamber - for vehicles with SU-HD6 carburettors
Thermo carburettor
Required: 1
for 5/16" throttle spindles with 0.010" oversize. Length: 235 mm
Required: 1
services one SU-HD8 carburettor. Comprising service kit 200204 plus throttle disc and throttle spindle
Required: 2