SU-HS8 internal carburettor
with piston - SU-HS8 carburettor
Required: 2
piston return - paint colour on end coil: red/green
4.2 and 3.4
Required: 2
piston return - paint colour on end coil: blue/black
2.8
Required: 2
- marked: BAW
4.2 Series I LHD: to engine no. 7L47898 - 4.2 Series I RHD: all models - 4.2 Series II RHD: to engine no. 7L80999
Required: 2
- marked: BBK
4.2 Series I LHD: from engine no. 7L47899 - 4.2 Series II LHD: to engine no. 7L80999
Required: 2
- marked: BCC
4.2 Series II: from engine no. 7L81000
Required: 2
- marked: BAU
2.8 Series I LHD: to engine no. 7G20380 - Series I RHD: to engine no. 7G16693
Required: 2
- marked: BBL
2.8 Series I LHD: to engine no. 7G20381 - Series II 2.8: all models
Required: 2
with spring - carburettor piston
Required: 2
front carburettor
Required: 1
rear carburettor
Required: 1
throttle spindle
Required: 1
front carburettor
Required: 1
rear carburettor
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Required: 4
throttle spindle on rear carburettor - stainless steel reproduction
Required: 1
mixture adjusting - front carburettor
Required: 1
mixture adjusting - rear carburettor
Required: 1
Required: 2
Required: 2
main jet fitting
Required: 2
main jet
Part of our sundries kit 320567 (ill. 31)
Required: 2
disc - above jet
Required: 2
front SU-HS8 carburettor, diameter: 0.100" - identification: blue and grey marking sleeves
Required: 1
rear SU-HS8 carburettor, diameter: 0.100" - identification: yellow and grey marking sleeves
Required: 1
front carburettor - variant with overflow connection
Required: 1
rear carburettor - variant without overflow connection
Required: 1
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat
Required: 2
for SU HS type carburettor - uprated 'unsinkable' type, made from closed cell Nitrile rubber foam, resistant to modern ethanol based fuels
Required: 2
Required: 2
Mounting float chamber
Required: 2
Mounting float chamber
Required: 2
Mounting float chamber
Required: 2
Required: 1
with 5/16" diametre and 4.1/4" length. Rod must be cut to length
Connecting rod must be cut to length
Required: 1
services front SU-HS8 carburettor. Comprising service kit 213719 plus throttle disc and throttle spindle
Required: 1
services rear SU-HS8 carburettor. Comprising service kit 213719 plus throttle disc and throttle spindle
Required: 1
