Crankshaft - 3.4 engine
upper - uprated double row endless chain with 100 pitches
Required: 1
camshaft sprocket - feature: fixed with 4 screws
Required: 2
double row - variant for separate plate for timing adjustment
Required: 2
lower - uprated double row endless chain with 82 pitches
Required: 1
standard size. Specifications: 3.4 litre 6-cylinder engine, 3-ring piston, standard bore size: 3.267", compression ratio: 8.0:1
Required: 6
+0.020" oversize. Specifications: 3.4 litre 6-cylinder engine, 3-ring piston, standard bore size: 3.267", compression ratio: 8.0:1
Required: 6
+0.040" oversize. Specifications: 3.4 litre 6-cylinder engine, 3-ring piston, standard bore size: 3.267", compression ratio: 8.0:1
Required: 1
standard
Required: 1
for 2.4, 2.8 and 3.4 engine - nominal dimensions: 3.267 x 3.393 x 6.978"
Required: 6
for 2.4, 2.8 and 3.4 engine. Competition variant with collar - nominal dimensions: 3.267 x 3.393 x 6.978". Please note: cylinder block needs modification
Required: 6
reconditioned, in exchange - feature: no oil channel to small end
Required: 6
Required: 12
standard size - shaft diameter: 2.086"
Required: 1
+0.010" oversize - shaft diameter: 2.086"
Required: 1
+0.020" oversize - shaft diameter: 2.086"
Required: 1
+0.030" oversize - shaft diameter: 2.086"
Required: 1
+0.040" oversize - shaft diameter: 2.086"
Required: 1
+0.060" oversize - shaft diameter: 2.086"
Required: 1
crankshaft - for air conditioner compressor
All models with air conditioning
Required: 1
crankshaft
Genuine specification
Required: 1
behind crankshaft damper
New version with 'O' ring instead of keyway
Required: 1
without bearings - new item
Required: 1
- exchange
Series II with manual transmission
Required: 1
- new item
Series II with manual transmission
Required: 1
flywheel
Series III with manual transmission
Required: 1
- exchange
Series III with manual transmission
Required: 1
- new item
Series III with manual transmission
Required: 1
clutch cover to flywheel - outer
Manual transmission
Required: 3
clutch cover to flywheel - centre
Series II with manual transmission
Required: 2
flywheel to crankshaft
Series II with manual transmission
Required: 10
flywheel to crankshaft
Series III with manual transmission
Required: 10
crankshaft
Series II with manual transmission
Required: 1
crankshaft
Series III with manual transmission
Required: 1
new item for models with automatic transmission
Required: 1
drive plate - for vehicles with automatic transmission
Series III
Required: 1
drive plate
Series II with automatic transmission
Required: 2
flywheel to crankshaft
Series II with automatic transmission
Required: 10
drive plate
Series III with automatic transmission
Required: 2
drive plate to crankshaft
Series III with automatic transmission
Required: 10
Classic XL20W-50
Required: 2
Content: 5 l (€9.80 / 1 l)