Cylinder head - 4.2 engine
on rocker cover with golden 'Jaguar' letters on black surface. Dimensions: 95 x 38 mm
Required: 2
on rocker cover with golden 'Jaguar' domed acrylic letters on black surface. Dimensions: 95 x 38 mm
Required: 2
on rocker cover with golden 'Daimler' letters on black surface. Dimensions: 95 x 38 mm
Required: 2
made in red vulcanised fibreboard with the correct rivets and brackets
Required: 6
90° angled - plastic reproduction with Champion lettering
Required: 6
Series I and II: carburettor cars
- alternatives
Required: 6
Series I and II: carburettor cars
- alternatives
Required: 6
Series II: all fuel injection cars
- alternatives
Required: 6
Series II: all fuel injection cars
- alternatives
Required: 6
Series III: fuel injection cars for USA, Canada, Japan and Sweden
- alternatives
Required: 6
Series III: fuel injection cars for USA, Canada, Japan and Sweden
- alternatives
Required: 6
Series II: fuel injection cars for all other countries
- alternatives
Required: 6
Series II: fuel injection cars for all other countries
- alternatives
Required: 6
LH - ripped variant. Used item
To engine no. 8L9080
Required: 1
To engine no. 7L96757
Required: 1
LH - spilt type
To engine no. 8L9080
Required: 1
LH - solid type
From engine no. 8L9081
Required: 1
modern high tech version with solid rear section
From engine no. 8L9081
Required: 1
RH - ripped variant. Used item
To engine no. 8L9080
Required: 1
chromed. Securing rocker covers and cylinder head
Series I and II.
Contents illustrations 17, 18, 53, 54, 55, 66 and 67
Required: 1
chromed. Securing rocker covers and cylinder head
Series III.
Contents illustrations 17, 18, 53, 54, 55, 66 and 67
Required: 1
securing rocker cover
Series II and III
Required: 2
RH - spilt type
To engine no. 8L9080
Required: 1
RH - solid type
From engine no. 8L9081
Required: 1
256° 'Road' specification - new items, supplied in pairs. Feature: Mounting with 2 and 4 bolts possible
Required: 1
long skirt version with 1.3/8" original diameter and 1" total height
Required: 12
with 1.3/8" original diameter and 7/8" total height
Required: 12
aftermarket with 1.3/8" original diameter and 7/8" total height
Required: 12
for Jaguar XK6 engines and 6.0 V12 engines (diameter 17.44 mm <> 0.6126 inch)
Required: 1
top, for inlet valve and exhaust valve - aftermarket
Required: 12
44.5 mm
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
Required: 6
44.5 mm - reproduction
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
Required: 6
made from 214N stainless steel. Head diameter: 47.7 mm
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476
Required: 6
made from 214N stainless steel - reproduction with 47.7 mm head diameter
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476
Required: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Required: 6
made of chrome-nickel-magnesium steel with nitrided surface. Diameter: 41.3 mm
Required: 6
inlet valve - bronze valve guide with 0.502" outside diameter and 1.866" length
Required: 6
inlet valve +0.003" (1st oversize). Steel type
Required: 6
inlet valve - bronze valve guide with 0.507" outside diameter and 1.866" length
Required: 6
inlet valve, 2nd oversize with 12.85 mm outer diameter and 47.41 mm length. Steel type
Required: 6
inlet valve - bronze valve guide with 0.504" outside diameter and 1.866" length
Bronze type for lead free applications
Required: 6
inlet valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Required: 6
inlet valve - bronze valve guide with 0.510" outside diameter and 1.866" length
Required: 6
exhaust valve, 1st oversize with 12.83 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.506" outside diameter and 1.957" length
Required: 6
exhaust valve, 2nd oversize with 12.88 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.507" outside diameter and 1.957" length
Bronze type for lead free applications
Required: 6
exhaust valve, 3rd oversize with 12.95 mm outer diameter. Steel type
Required: 6
exhaust valve - bronze valve guide with 0.510" outside diameter and 1.957" length
Required: 6
cam follower - diameter: 41.75 mm
Alternatives
Required: 12
cam follower - diameter: 41.75 mm. Reproduction
Alternatives
Required: 12
exhaust manifold - length: 1.5/8"
Series I and II.
Stainless steel, may replace original stud
Required: 14
exhaust manifold - length: 1.5/8"
Series I and II.
Stainless steel, may replace original stud
Required: 2
exhaust manifold - length: 1.5/8"
Series III.
Stainless steel, may replace original stud
Required: 16
7/16" - galvanised 3.4 mm thick washer for cylinder head dome nut
Required: 9
7/16" - galvanised 2.3 mm thick washer for cylinder head dome nut
Series I
Required: 5
7/16" - chromed 3 mm thick washer for cylinder head dome nut
Series I
- alternative to 207030
Required: 5
cylinder head - galvanized
Series II and III
Required: 5
rear crankshaft cover to cylinder block - diameter: 5/16"
Required: 16
engine breather
Series I Carburettor models with carbon canister
Required: 1
engine breather at cylinder head - reproduction made of PA11 plastic using the SLS process
Series I Carburettor models without carbon canister and alls Series II Carburettor models
Required: 1
engine breather at cylinder head - used item
Series I Carburettor models without carbon canister and alls Series II Carburettor models
Required: 1
engine breather
Series II and III - fuel injection cars
Required: 1
block to cylinder head
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Required: 1
oil feed pipe to block
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Required: 3
All Series I. Series II without oil cooler to engine no. 8L28178, USA, Canada and Japan with oil cooler to engine no. 8L9800, all other countries with oil cooler but without A/C to engine no. 8L9780, all other countries with oil cooler and A/C to engine no. 8L10300
Required: 6
block to cylinder head
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Required: 1
oil feed pipe to block
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Required: 2
Series II with oil cooler: USA, Canada and Japan from engine no. 8L9801, all other countries without A/C from engine no. 8L9781, all other countries with A/C from engine no. 8L10301
Required: 4
block to cylinder head
Series II without oil cooler from engine no. 8L28179 to 8L50475
Required: 1
oil feed pipe to block
Series II without oil cooler from engine no. 8L28179 to 8L50475
Required: 2
Series II without oil cooler from engine no. 8L28179 to 8L50475
Required: 4
block to cylinder head
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Required: 1
oil feed pipe to block
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Required: 2
Fuel injection cars only: Series II from engine no. 8L50476 and Series III to engine no. 8L102220
Required: 4
block to cylinder head
Fuel injection cars only: Series III from engine no. 8L102221
Required: 1
block to cylinder head - uprated steel braided variant to eradicatethe common leak on 6-cylinder engines
XJ6 4.2 Series II from engine no. 8L50476 and all 4.2 Series III (fuel injection models)
Required: 1
oil feed pipe to block
Fuel injection cars only: Series III from engine no. 8L102221
Required: 2
Fuel injection cars only: Series III from engine no. 8L102221
Required: 4
oil feed pipe to block
Repair bolt - 1.1/4" long
Required: 1
inlet valve. Hardened version for lead free applications. Dimensions: OD = 1.88", ID = 1.38", H = 0.43"
Carburettor cars to engine no. 8L64995, carburettor cars to engine no. 8L50475.
For lead free applications
Required: 6
inlet, hardened
Carburettor cars from engine no. 8L64996, carburettor cars from engine no. 8L50476.
For lead free applications
Required: 6
exhaust, hardened
For lead free applications
Required: 6
inlet manifold - length: 1.5/8"
Carburettor cars.
Stainless steel, may replace original stud
Required: 2
inlet manifold - length: 1.5/8"
Carburettor cars.
Stainless steel, may replace original stud
Required: 16
inlet manifold - length: 1.5/8"
Fuel injection cars
Required: 18
inlet manifold - length: 1.5/8"
Fuel injection cars.
Stainless steel, may replace original stud
Required: 18
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series I, Series II to engine no. 8L9080
Required: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series II from engine no. 8L9081 plus Series III except models for Germany and Switzerland
Required: 1
exchange. Straight port head with new valves, springs and guides, new cam bearings. Shimming up of camshafts and fitting hardened exhaust seat inserts for lead free applications
XJ6 4.2 Series III from engine no. 8L209816: models for Germany and Switzerland with air injection only
Required: 1
reproduction
To engine no. 7L1175
Required: 1
with Payen head gasket
From engine no. 7L7116 to 8L9080
Required: 1
with head gasket made from high quality composite material. Bore size: 93.30 mm + 0.5 mm, thickness: 0.64", built in thickness: 0.61"
from engine no. 7L1176 to 8L9080 (1970-74)
Required: 1
aftermarket
From engine no. 7L7116 to 8L9080
Required: 1
Series II from engine no. 8L9081
Required: 1
aftermarket
Series II from engine no. 8L9081
Required: 1
€59.00
