Crankshaft - 5.3 V12 Models
upper bolt
Required: 1
timing chain tensioner
Required: 1
upper and lower - uprated double row endless chain with 180 pitches
Alternatives
Required: 1
upper and lower - aftermarket chain with 180 pitches
Alternatives
Required: 1
- for distributor drive
Required: 1
auxiliary shaft - 3 piece set
Required: 1
with Goetze liner assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJS 5.3 V12 to engine no. 8S18000 (to September 1981, i.e. not HE engines)
Required: 12
with liners assembly, standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJS 5.3 V12 to engine no. 8S18000 (to September 1981, i.e. not HE engines)
Required: 1
with liner assembly, standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 11.5:1 - HE engines (from September 1981)
5.3 V12 from VIN...105048 to 179733 (1981-91)
Required: 12
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJS 5.3 V12 to engine no. 8S18000 (to September 1981, i.e. not HE engines)
Required: 12
standard size. Specifications: 5.3 V12 engine with 3-ring pistons, and 9.0:1 compression ratio. Standard bore size: 3.543"
XJS 5.3 V12 to engine no. 8S18000 (to September 1981, i.e. not HE engines)
Required: 1
standard size. Specifications: 3-ring piston, standard bore size: 3.543", compression ratio: 12.5:1
5.3 V12 from VIN...105048 to 179733 (1981-91)
Required: 1
for one piston. Standard size for 3 ring piston (2 compression rings, 1 oil ring)
To September 1981 (not HE engines)
Required: 12
standard size - complete car set
From October 1981 (HE engines only)
Required: 1
standard size - for single piston
From October 1981 (HE engines only)
Required: 12
standard size - complete car set
Fits all makes of pistons
Required: 1
fully finished grade 'A' liner with -0.002". Dimensions: 90.0 mm inner diameter and 143.8 mm total height
XJS 5.3 V12 to engine no. 8S18000 (to September 1981, i.e. not HE engines)
Required: 12
standard size - shaft diameter: 2.30"
Required: 1
+0.030" - shaft diameter: 2.30"
Required: 1
Required: 2
crankshaft - reconditioned, in exchange
XJS to engine no. 8S57571 (1975-87)
Required: 1
crankshaft - exchange
XJS from engine no. 8S57572 to 8S64244
Required: 1
crankshaft - exchange
XJS from engine no. 8S64245
Required: 1
crankshaft
Required: 1
oil pump
XJS to VIN...139051 (1975-87)
Required: 1
without bearings - new item
Required: 1
standard size - shaft diameter: 3.001"
Required: 1
with +0.010" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
with +0.020" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
with +0.030" oversize - shaft diameter of the standard bearing: 3.001"
Required: 1
new item for vehicles with automatic transmission
XJS with BW12 automatic transmission to engine no. 8S7016 (1975-77)
Required: 1
new item for vehicles with automatic transmission
XJS with GM400 automatic transmision from engine no. 8S7017 to 8S66782 (1977-89)
Required: 1
new item for vehicles with automatic transmission
XJS from engine no. 8S66783 (1989-91)
Required: 1
drive plate - for vehicles with automatic transmission
Required: 1
drive plate to converter
XJS from engine no. 8S7017 to 8S14174
Required: 6
drive plate to converter
XJS from engine no. 8S14175 to 8S41343
Required: 6
drive plate to converter
XJS from engine no. 8S41344
Required: 6
Classic XL20W-50
Required: 3
Content: 5 l (€9.80 / 1 l)
SAE 15W-40
Required: 3
Content: 5 l (€8.40 / 1 l)
€421.90
€197.99
