Automatic gearbox GM400 - outer - 5.3 V12 (1977-93)
GM400 with identification code 78ZA, 79ZA, 80ZA or 81ZA, including torque converter - reconditioned, in exchange
5.3 V12 to engine no. 8S18000 (1977-82)
Required: 1
GM400 with identification code 80ZV, including torque converter - reconditioned, in exchange
5.3 V12 from engine no. 8S18001 to 8S45526 (1982-86)
Required: 1
GM400 with identification code ZVA, including torque converter - reconditioned, in exchange
5.3 V12 from engine no. 8S45527 to 8S64244 (1986-88)
Required: 1
GM400 with identification code ZXA, including torque converter - reconditioned, in exchange
5.3 V12 from engine no. 8S64245 to VIN...188104 (1988-93)
Required: 1
for GM400 automatic transmission - reconditioned, in exchange
5.3 V12 from engine no. 8S7017 to 8S14174 (1977-79)
Required: 1
for GM400 automatic transmission - reconditioned, in exchange
5.3 V12 from engine no. 8S14175 to VIN...188104 (1979-93)
Required: 1
bell housing, bottom
Required: 1
bell housing
5.3 V12 to VIN...179736 (1977-91)
Required: 1
cover to bell housing
5.3 V12 to VIN...179736 (1977-91)
Required: 2
cover to bell housing
5.3 V12 to VIN...179736 (1977-91)
Required: 2
cover to bell housing
5.3 V12 to VIN...179736 (1977-91)
Required: 2
gearbox breather
Required: 1
kick down switch - variant with two spade connections, works the same as OE just use one prong instead of both. For vehicles with GM400 automatic transmission
Required: 1
Required: 6
If not available use gasket and seal kit 201803
Required: 1
If not available use gasket and seal kit 201803
Required: 1
parking
Required: 1
Required: 1
Required: 2
Required: 1
Required: 1
dipstick - lower
Required: 1
upper dipstick tube
Required: 1
automatic transmission - length: 33"
Cut to 19" (inlet) and 13" (outlet)
Required: 1
gearbox to oil cooler inlet
Required: 1
gearbox to oil cooler outlet
Required: 1
oil pipe
Required: 4
oil pipe
Required: 1
oil pipe
Required: 2
oil pipe
Required: 2
speedometer - 3.07:1 axle ratio
Required: 1
speedometer pinion
Required: 1
pinion housing
Required: 1
speedometer pinion housing - GM400 automatic transmission
Required: 1
speedometer pinion housing - GM400 automatic transmission
Required: 1
Hightec ATF 4000
Required: 10
for GM400 automatic transmission. Content: gaskets, seals and sealing rings
Required: 1
for GM400 automatic transmission. Content: gaskets, seals, sealing rings and clutch friction plates
Required: 1