SU-H6 internal carburettor - XK120 from January 1952
for 5/16" throttle spindles with 0.010" oversize
Length: 235 mm
Required: 1
with piston
Required: 2
fixed type. For standard mixture - marked: RG
Our recommendation
Required: 2
fixed type. For standard mixture - marked: WO2
Required: 2
fixed type. For standard mixture - marked: RF
Required: 2
front carburettor
Required: 1
rear carburettor
Required: 1
for 5/16" throttle spindles with standard size.
Length: 115 mm
Required: 1
throttle spindle. For bodies with worn cast in bushes, useable on SU and Zenith Stromberg carburettors with 5/16" throttle spindle
Required: 4
throttle disc
Fixed to the cover band of the starter motor
Required: 2
Coupling link to throttle spindle and carburettor spindle
Required: 2
Coupling link to throttle spindle and carburettor spindle
Required: 2
Coupling link to throttle spindle and carburettor spindle
Required: 2
with treated rubber seals - for SU-H type carburettors with fixed needle
Required: 1
carburettor. Copy with 2.3/8" diameter
Please use with float lever 3141
Required: 2
for SU-H, SU-HD and SU-HS type carburettors - superior replacement of needle valve and seat
Superior replacement of needle valve and seat 204291 (ill. 40)
Required: 2
float on SU carburettors - height: 1/4". Fits to the original float chamber lid only
Fits to the original float chamber lid only
Required: 2
for SU H & HD type carburettor, diameter: 1.7/8" - unsinkable' float, made from Nitrile rubber foam
Required: 2
and spring - inside float chamber lid on SU carburettors
Required: 2
float chamber and cast pipe to front carburettor
Required: 1
banjo bolt and float chamber to carburettor body
Required: 1
banjo bolt to cast pipe
Required: 1
banjo bolt and cast pipe to thermo carburettor
Required: 1
for single carburettor
Comprising service kit 200202 (ill. 57) plus throttle disc and throttle spindle
Required: 2
