Cylinder block - XK140
cylinder head, with alignment dowel - length: 6.1/2"
Required: 1
cylinder head - length: 6.13/16". Variant with 9/16" UNF thread on block side for badly worn cylinder blocks
With 9/16" UNF thread on block side for badly worn cylinder blocks
oil gallery - galvanised version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Required: 6
oil gallery - brass version with 1/2" UNF thread, fitted to the RH side of the cylinder block
Required: 6
crankshaft to cylinder block
Required: 1
rear cover
Required: 1
rear crankshaft cover to cylinder block - diameter: 5/16"
Required: 2
crankshaft rear. This kit replaces both types of original crankshaft seals. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
XK6 engines with groove in the rear recess of the oil sump
Required: 1
crankshaft rear. This kit replaces both types of original crankshaft seals. It is mounted on the inner side of the crankshaft flange, so the crankshaft needs to be processed at the former sealing surface. During an engine overhaul these changes can be easily done while grinding the crankshaft
XK6 engines with web in the rear recess of the oil sump
Required: 1
To engine no. G1907
Required: 1
crankshaft front - two-piece
To engine no. G1907.
Required: 1
crankshaft front - two-piece modern high tech cometic version
to engine no. G1907
Required: 1
crankshaft front. Please note: no machining necessary
To engine no. G1907
Required: 1
in cylinder block, behind chain tensioner
From engine no. G4431
Required: 1
Oil feed pipe from cylinder block to head
Required: 2
securing oil feed pipe
Oil feed pipe from cylinder block to head
Required: 1
securing oil feed pipe - repair bolt length: 1.1/4"
Oil feed pipe from cylinder block to head
Required: 1
sealing aperture for heater element
Cars without heater
Required: 1
water pump
Part of our conversion gasket set 203081.
Required: 1
two-piece
Part of our conversion gasket set 203081.
Required: 1
timing cover, two-piece
To engine no. G1907.
Part of our conversion gasket set 203081.
Required: 1
timing cover - two-piece
From engine no. G1908.
Part of our conversion gasket set 203081.
Required: 1
matt black
Quantity as required
Content: 400 ml (€68.18 / 1000 ml)
€474.83
€474.83