Oil sump - XK140
reconditioned, in exchange
To engine no. G1907
Required: 1
oil pump and distributor
To engine no. G1907
Required: 1
oil pump drive shaft
To engine no. G1907
Required: 1
oil pump
To engine no. G1907
Required: 1
between drive shaft and drive gear
To engine no. G1907
Required: 1
oil pump
To engine no. G1907
Required: 1
securing oil pump to main bearing cap
To engine no. G1907
Required: 3
and driven pinion for oil pump
To engine no. G1907
Required: 1
for oil pump driven gear
To engine no. G1907
Required: 1
for oil pump driving gear
To engine no. G1907
Required: 1
securing driving gear on shaft
To engine no. G1907
Required: 1
between cover and oil pump body
To engine no. G1907
Required: 1
oil pump
To engine no. G1907
Required: 1
oil suction pipe
To engine no. G1907
Required: 1
oil suction pipe
To engine no. G1907
Required: 1
oil suction pipe to main bearing cap
To engine no. G1907
Required: 1
oil pump
To engine no. G1907
Required: 1
relief valve
To engine no. G1907
Required: 1
relief valve
To engine no. G1907
Required: 1
with special connections for the original oil pickup pipes on 3.4 and 3.8 XK6 engines
from engine no. G1908
Required: 1
assembly
From engine no. G1908. May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 92)
Required: 1
assembly. High quality aftermarket product
From engine no. G1908. May replace original type oil pump. Please note: oil suction pipe needs adaptor 356227 (ill. 92)
Required: 1
original type - reconditioned, in exchange
From engine no. G1908
Required: 1
oil pump and distributor
From engine no. G1908
Required: 1
drive shaft
From engine no. G1908
Required: 1
oil pump
From engine no. G1908
Required: 1
oil pump
From engine no. G1908
Required: 1
on oil pump - supporting suction pipe
From engine no. G1908
Required: 1
oil pump to bearing cap
From engine no. G1908
Required: 3
oil pump
From engine no. G1908
Required: 1
From engine no. G1908
Required: 1
suction pipe to bearing cap
From engine no. G1908
Required: 1
oil suction pipe
From engine no. G1908
Required: 1
oil suction pipe
From engine no. G1908
Required: 1
To engine no. G1907.
Oil seal conversion.
Required: 1
crankshaft front - two-piece
To engine no. G1907.
Required: 1
crankshaft front - two-piece modern high tech cometic version
to engine no. G1907
Required: 1
3/4" x 5/16" UNF
Securing oil sump to cylinder block
Required: 25
inside oil sump
Required: 1
oil suction pipe
Required to fit oil suction pipe to our high output oil pumps 480724 and 3988 (ill. 1)
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
€256.65
€152.92
