Fuel pump and fuel tank - XK150S
made from aluminium
To May 1958: OTS to 830559 (LHD)
Required: 1
made from mild steel
To May 1958: OTS to 830559 (LHD)
Required: 1
made from aluminium. Indentify by single vent breather
From May 1958: OTS from 820005 (RHD) and 830560 (LHD), FHC from 824789 (RHD) and 835961 (LHD), DHC from 827334 (RHD) and 837993 (LHD)
Required: 1
made from mild steel. Indentify by single vent breather
From May 1958: OTS from 820005 (RHD) and 830560 (LHD), FHC from 824789 (RHD) and 835961 (LHD), DHC from 827334 (RHD) and 837993 (LHD)
Required: 1
for filter in fuel tank - high qualitiy variant in Dupont Viton
Required: 1
chromed - for fuel hoses with an inner diameter from 5/16"
Must be fitted when using alloy tanks
Required: 1
filler neck to fuel tank. Please note: warranty is void when using with E10 or any other type of racing / special fuel
Required: 1
fuel tank venttilation
From May 1958: OTS from 820005 (RHD) and 830560 (LHD), FHC from 824789 (RHD) and 835961 (LHD), DHC from 827334 (RHD) and 837993 (LHD)
Required: 1
ventilation hose
From May 1958: OTS from 820005 (RHD) and 830560 (LHD), FHC from 824789 (RHD) and 835961 (LHD), DHC from 827334 (RHD) and 837993 (LHD)
Required: 2
square body pump with stepped top end cap. Variant with condenser and dual polarity
Required: 2
square body pump with stepped top end cap. Electronic variant for negative earthed cars
Required: 2
square body pump with stepped top end cap. Electronic variant for positive earthed cars
Required: 2
fuel pump mounting - supplied with nut and spring washer
Fuel pump to mounting bracket
Required: 4
from fuel pipe to inlet side of front fuel pump
Required: 1
from outlet side of rear fuel pump to fuel pipe
Required: 1
with glass body. Supplied without filer element
Required: 1
fuel filter
Required: 1
fuel filter
Required: 1
