Joint cleaning tool Nippelfips
Thin fluid oil is pressed in with extremely high pressure by hammer blow. Loosens any resinous or rusted grease nipple and makes the bearing common again - guaranteed!
The application is very simple:
You fill the Nippelfips with oil (motor oil or also the very low-viscosity sewing machine oil), place the tool on the grease nipple and hit the piston end of the Nippelfips once or twice with a rubber or plastic hammer. When filling the Nippelfips, please make sure that no air is included. The air cushion would dampen the blow and thus reduce the effect.
The oil is forced through the grease nipple and the bearing by the impact with high pressure. Gummed-up grease or other impurities are thus forced out and the bearing can now be lubricated with suitable grease.
Please wear protective goggles, the oil can splash out of the bearing at high pressure depending on the design of the bearing.
Accessory Joint cleaning tool Nippelfips
Content: 500 ml (€23.68 / 1000 ml)
