Cylinder head - 2.25 litre 4-cylinder Petrol
bare head with 8:1 compression ratio, for leaded fuel - new item with metric threads
Required: 1
oil pipe to cylinder haead and to engine block- feature: M10x1.5 standard thread
Required: 2
exhaust valve, RH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Required: 2
exhaust valve, RH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Required: 2
inlet valve, LH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Required: 2
inlet valve, LH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Required: 2
rocker arm adjusting srew
To suffix B (1985 MY)
Required: 8
retaining support panel
To suffix B (1985 MY)
Required: 1
retaining support panel
From suffix C (1986 MY)
Required: 1
inlet valve, RH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Required: 2
inlet valve, RH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Required: 2
exhaust valve, LH cranked
Defender 2.25 litre Petrol with engine suffix 'A' and 'B' (1983-84)
Required: 2
exhaust valve, LH cranked
Defender litre Petrol from engine suffix 'C' (1984)
Required: 2
inlet and exhaust valve - may replace the genuine fitted double spring
Required: 8
From engine number 11H02984C and for use on cylinder heads with exhaust valve seat insert
Required: 4
complete unit with slide rail, roller, bolt and washer
Required: 8
Can be fitted if suffering from excessive valve stem or valve rocker wear
Required: 8
rocker cover - lower position
Early rock cover with seperate holes for oil filler and breather filter
Required: 3
with engine breather connection
Late rock cover with shared hole for breather filter and oil filler
Required: 1
rocker cover - upper position
Early rock cover with seperate holes for oil filler and breather filter
Required: 3
rocker cover
Late rock cover with shared hole for breather filter and oil filler
Required: 1
orange
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
oil filler
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
engine breather
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
retaining plate tappet to cover
Early rock cover with seperate holes for oil filler and breather filter
Required: 4
"CLEARANCE"
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
engine breather
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
oil filler cap
Early rock cover with seperate holes for oil filler and breather filter
Required: 1
Late rock cover with shared hole for breather filter and oil filler
Required: 1
