Differential and propshaft
front axle
4-cylinder models to VIN...CA252578 (1983-85)
Required: 1
front axle
Defender 4-cylinder Petrol from VIN...CA252579 to LA939975 (1985-94)
Required: 1
for 8 cylinder engines
From VIN CA 254407 with V8 engines and diesel from VIN MA 939976 to ZA 612404
Required: 1
front axle
Defender from VIN...1A608154 to 6A713927 (2001-06)
Required: 1
greaseable type with 82 mm overall length
Benziner to VIN...LA939975 (1983-94)
Required: 2
greaseable type with 75 mm span width and 27 mm cup diameter
Diesel to VIN...1A608153 (1983-2001)
Required: 2
greaseable type with 27 mm cup diameter by 93 mm
from VIN...1A608154 to 6A713927 (2001-06)
Required: 2
set includes the gaiter an both fitting hose clips
Required: 1
differential input shaft - feature: 24 internal splines
Required: 1
differential flange
Defender to VIN...LA930455 (1983-93)
Required: 1
differential flange
Defender from VIN...LA930456 (1993-2006)
Required: 1
securing drive shaft to flange
Defender to VIN...LA930455 (1983-93)
Required: 1
securing drive shaft to flange
Defender from VIN...LA930456 (1993-2006)
Required: 1
differential flange
Defender to VIN...LA930455 (1983-93)
Required: 1
differential flange
Defender from VIN...LA930456 (1993-2006)
Required: 1
securing drive shaft to flange
Defender to VIN...LA930455 (1983-93)
Required: 1
selector rod on housing differential
Required: 1
complete inkl. mounting material
New. To VIN KA 930434 with Axlecode 20L and 21L
Required: 1
complete inkl. mounting material
Exchange. To VIN KA 930434 with Axlecode 20L and 21L
Required: 1
Set. Includes bevel gears, shaft, circlip and pin roll
Axlecode 20L 21L 22L 23L, 10 spline
Required: 1
set with bevel gears with 24 splines, shaft, circlips and slotted spring pin
axle code 61L, 62L, 63L and 64L
Required: 1
Set. Includes bevel gears, shaft, circlip and pin roll
Axlecode 10M 11M 12M 13M 14M 15M 16M 17M, 24 spline
Required: 1
cross shaft, pinion
cross shaft, pinion
cross shaft, pinion
Required: 1
crown wheel and pinion - lateral bearing
Required: 2
3.54:1 ratio - feature: securing with flange nut
axle code 61L, 62L, 63L and 64L plus 10M, 11M, 12M, 13M, 14M, 15M, 16M and 17M
Required: 1
pinion end - thickness: 0.038"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.040"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.042"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.044"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.046"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.048"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.050"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.052"
20L 21L 22L 23L
Required: 1
pinion end - thickness: 0.054"
To VIN KA 930434
Required: 1
pinion end - thickness: 0.056"
20L 21L 22L 23L
Required: 1
pinion, front position -1,548mm
From VIN LA 390435
Required: 1
pinion, front position -1,498mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,448mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,398mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,348mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,298mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,248mm
61L 62L 63L 64L
Required: 1
pinion, front position -1,198mm
61L 62L 63L 64L
Required: 1
