Transfer box LT230 - gears and differential
complete
to transfer box number 22D 575041G
Required: 1
complete
ab Verteilergetriebenummer 22D 575042G
Required: 1
Sleeve and Hub combination. High/low gear. LT230 transfer box
to transfer box suffix D and transfer box suffix 29D (V8 Vergaser) also ransfer box suffix 25D (V8 Vergaser)
Required: 1
Sleeve and Hub combination. High/low gear
from transfer box suffix E
Required: 1
Sleeve and Hub combination. High/low gear. LT230 transfer box
Required: 1
Sleeve and Hub combination. High/low gear. LT230 transfer box
Required: 1
high gear
transfer box suffix 20D to number 226368E
Required: 1
high gear
transfer box suffix 20D from number 226368E
Required: 1
high gear
transfer box suffix 22D to number D and 25D
Required: 1
high gear
transfer box suffix 32D from VIN...MA939976 to transfer box number 511442E
Required: 1
high gear
transfer box 32D from number 551443G
transfer box 32D from number 551443G
Required: 1
high/low gear
from VIN...MA939976
Required: 1
for high/low gear selector shaft locking in LT230 transfer box
to VIN...LA939975
Required: 1
for high/low gear selector shaft locking in LT230 transfer box
ab VIN...MA939976
Required: 1
for high/low gear selector shaft locking in LT230 transfer box
to VIN...LA939975
Required: 1
for high/low gear selector shaft locking in LT230 transfer box
from VIN...MA939976
Required: 1
for high/low gear selector rod in LT230 transfer boxes
Required: 1
on the intermediate shaft in the transfer box - reduction ratio: 1.4:1 (interlocking: 19, 41, 39)
transfer box suffix 22D from number C
Required: 1
on the intermediate shaft in the transfer box - reduction ratio: 1.4:1 (interlocking: 19, 41, 39)
transfer box suffix 25D
Required: 1
at intermediate shaft front and rear position
Required: 2
on the intermediate shaft in the transfer box, front and rear bearing
Required: 2
on the intermediate shaft in the LT230 transfer box - length: 60.4 mm
Defender to transfer box suffix 43D
Required: 1
on the intermediate shaft in the LT230 transfer box - length: 58.35 mm
Defender from transfer box suffix 43D
Required: 1
mainshaft
for transfer box suffix 25D, 22D, 47D and 43D
Required: 1
main shaft 38 teeth
for transfer box suffix 29D, 32D, 38D and 40D
Required: 1
for main shaft in LT230 transfer box - variant with 26 teeth
for transfer box suffix 29D
main shaft 28 teeth
for transfer box suffix 32D in combination with an LT77S gearbox
Required: 1
