Crankshaft 2.25 diesel engine
camshaft
Required: 1
Idler shaft
Required: 1
retaining tensioner to cylinder block
To engine no. 36619420B
Required: 1
retaining tensioner to cylinder block
From engine no. 36619420B
Required: 1
retaining ratchet to cylinder block
To engine no. 36619420B
Required: 1
for 3 main bearing engine - new item
Required: 1
for 3 main bearing engine - reconditioned, in exchange
Required: 1
standard size
Series II, IIA and III 2.25 litre Diesel with 3 main bearing crankshaft (1958-81)
Required: 1
+0.010" oversize
Series II, IIA and III 2.25 litre Diesel with 3 main bearing crankshaft (1958-81)
Required: 1
+0.020" oversize
Series II, IIA and III 2.25 litre Diesel with 3 main bearing crankshaft (1958-81)
Required: 1
+0.030" oversize
Series II, IIA and III 2.25 litre Diesel with 3 main bearing crankshaft (1958-81)
Required: 1
+0.040" oversize
Series II, IIA and III 2.25 litre Diesel with 3 main bearing crankshaft (1958-81)
Required: 1
standard size
Series III 2.25 litre Diesel with 5 main bearing crankshaft (1981-85)
Required: 1
+0.010" overzise
Series III 2.25 litre Diesel with 5 main bearing crankshaft (1981-85)
Required: 1
+0.020" overzise
Series III 2.25 litre Diesel with 5 main bearing crankshaft (1981-85)
Required: 1
+0.030" oversize
Series III 2.25 litre Diesel with 5 main bearing crankshaft (1981-85)
Required: 1
+0.040" oversize
Series III 2.25 litre Diesel with 5 main bearing crankshaft (1981-85)
Required: 1
crankshaft in standard size. Two piece set
Required: 1
crankshaft in +0.0025" oversize. Two piece set
Required: 1
crankshaft in +0.005" oversize. Two piece set
Required: 1
crankshaft in +0.0075" oversize. Two piece set
Required: 1
crankshaft in +0.010" oversize. Two piece set
Required: 1
crankshaft rear - 3-pieces
Required: 1
lower position
Required: 2
crankshaft
Vehicles with 3 main bearings
Required: 1
pulley to crankshaft
Vehicles with 3 main bearings
Required: 1
Vehicles with 5 main bearings
Required: 1
standard size. Specifications: 2286cc. engine, 4-ring piston, standard bore size: 3.562", compression ratio: 23:1
Required: 4
+0.020" oversize. Specifications: 2286cc. engine, 4-ring piston, standard bore size: 3.562", compression ratio: 23:1
Required: 4
+0.040" oversize. Specifications: 2286cc. engine, 4-ring piston, standard bore size: 3.562", compression ratio: 23:1
Required: 4
Required: 4
To engine numbers 36619420B
Required: 1
From engine numbers 36619420B
Required: 1
Merkmal: Fahrzeuge mit 9" Kupplung
Required: 1
