Cylinder head 2.25 diesel engine
exchange. Characteristique: imperial threads
Series IIA to suffix "J" inclusive
Required: 1
exchange. Characteristic: imperial threads
Series IIA from suffix "K"
Required: 1
exchange. Characteristic: imperial threads
Series III to engine no. 36619419B
Required: 1
exchange. Characteristic: metric threads
Series III from engine no. 36619420B
Required: 1
new item less valves and springs, compression ratio: 23:1. Characteristic: metric threads
all models Series IIA and Series III
Required: 1
Series IIA and III to engine no. 36623742B
Required: 1
Series III from engine no. 36623743B
Required: 1
engine breather
Series IIA, Serie III to engine no. 36623741B
Required: 1
engine breather
Series III from engine no. 36623742B
Required: 1
engine breather
Series IIA, Serie III to engine no. 36623741B
Required: 1
engine breather
Series III from engine no. 36623742B
Required: 1
temperature transmitter - feature: M24x1.0 external thread
Required: 1
- imperial
Required: 1
temperature sensor adaptor to cylinder head
Required: 1
Series IIA and III - if cylinder head 505139 or 505140 fitted
Required: 1
Series IIA and III - if cylinder head 505139 or 505140 fitted
Required: 7
Series III - if cylinder head 505162 or 505162 fitted
Required: 1
Series III - if cylinder head 505162 or 505162 fitted
Required: 7
Series III - if cylinder head 505162 or 505162 fitted
Required: 1
- front position
Series IIA
Required: 1
Series IIA
Required: 1
- rear position
Series III
Required: 1
Series IIA, Series III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 5
exhaust valve, LH cranked
Series IIA, Serie III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 2
exhaust, LH
Series III engine prefix 366 from siffix "C"
Required: 2
exhaust valve, RH cranked
Series IIA, Serie III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 2
exhaust, RH cranked
Series III engine prefix 366 from siffix "C"
Required: 2
inlet valve, LH cranked
Series IIA, Serie III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 2
inlet valve, LH cranked
Series III engine prefix 366 from siffix "C"
Required: 2
inlet valve, RH cranked
Series IIA, Serie III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 2
inlet valve, RH cranked
Series III engine prefix 366 from siffix "C"
Required: 2
rocker arm
Series IIA, Serie III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 8
rocker arm
Series III engine prefix 366 from siffix "C"
Required: 8
rocker arm adjusting srew
Series IIA, Series III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 8
rocker arm adjusting srew
Series III engine prefix 366 from siffix "C"
Required: 8
retaining rocker shaft
Series IIA, Series III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 1
retaining rocker shaft
Series III engine prefix 366 from siffix "C"
Required: 1
pedestal
Series IIA, Series III with engine prefix 906 and prefix 366 suffix "A" and "B"
Required: 3
retaining rocker cover
Series III engine prefix 366 from siffix "C"
Required: 3
Series IIA, Series III to engine no. 36627329C
Required: 4
Series IIA, Series III to engine no. 36627329C
Required: 4
Series IIA, Series III to engine no. 36627329C
Required: 16
Series IIA, Series III to engine no. 36627329C
Required: 8
inlet and exhaust valve - may replace the genuine fitted double spring
Required: 8
complete unit with slide rail, roller, bolt and washer
Required: 8
retaining cam follower
Series IIA, Series III to engine no. 36619419B
Required: 8
retaining cam follower
Series III from engine no. 36619420B
Required: 8