Cylinder head 2.25 petrol engine
exchange
Series IIA to engine suffix "J" inclusive
Required: 1
exchange
Series IIA from engine suffix 'K'
Required: 1
exchange - compression ratio: 8:1
Series III to engine no. 36123671B and 36407285B
Required: 1
exchange - compression ratio: 8:1
Series III from engine no. 36123672B and 36407286B
Required: 1
bare head with 8:1 compression ratio, for leaded fuel - new item with imperial threads
Series II, IIA and III
Required: 1
bare head with 8:1 compression ratio, for leaded fuel - new item with metric threads
Series II, IIA and III
Required: 1
Series II
Required: 1
Series IIA, Series III engine prefix 901 and 904 from suffix "E" and all prefix 361 and 361
Required: 1
Series III engine prefix 901 and 904 suffix "E" and engine prefix 361 und 364 suffix "A" and "B"
Required: 3
Series III engine prefix 361 and 364 from suffix "C"
Required: 3
with breather filter
Series II, IIA and Series III from engine prefix 901 and 904 from suffix "E" and all prefix 3610and 364
Required: 1
orange
Series III engine prefix 901 and 904 from suffix "D" inclusive
Required: 1
engine breather
Series III engine prefix 901 and 904 from suffix "D" inclusive
Required: 1
Series II, IIA and Series III from engine prefix 901 and 904 from suffix "E" and all prefix 3610and 364
Required: 1
Series III engine prefix 901 and 904 from suffix "D" inclusive
Required: 1
with 17 cm total length
Series II and IIA with 2.25 litre Petrol engine to engine suffix "H" (1958-67)
Required: 5
with 13 cm total length
Series IIA with 2.25 litre Petrol engine from engine suffix "J" (1967-71) and all Series III with 2.25 litre Petrol engine (1971-85)
Required: 5
for heater valve hole - imperial
Required: 1
for choke solenoid
Vehicles with thermostat operated choke
Required: 1
Vehicles without thermostat operated choke
Required: 1
retaining otter switch
Vehicles with thermostat operated choke
Required: 3
retaining cover plate
Vehicles without thermostat operated choke
Required: 3
Series III from engine no. 36123672B, 36407286B
Required: 1
for temperature sensor - fitted to cyliner head
Series III from engine no. 36123672B, 36407286B
Required: 1
inlet valve. Steel type
Series II and IIA 2.25 litre Petrol to engine suffix 'J' (1958-67)
Required: 4
- inlet valve. Steel type
From engine suffix "K"
Required: 4
inlet valve
Series II and IIA 2.25 litre Petrol to engine suffix 'J' (1958-67)
Required: 4
exhaust valve. Steel type
Series II and IIA 2.25 litre Petrol to engine suffix 'J' (1958-67)
Required: 4
- exhaust valve. Steel type
From engine suffix "K"
Required: 4
exhaust valve
Series II and IIA 2.25 litre Petrol to engine suffix 'J' (1958-67)
Required: 4
- front position
Series II
Required: 1
- front position
Series IIA
Required: 1
- rear position
Series II and IIA
Required: 1
- rear position
Series III
Required: 1
Series II
Required: 2
- inner position
Series II
Required: 3
- rear position
Series II
Required: 1
- front position
Series II
Required: 1
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with suffix 'A' and 'B'
Required: 5
Series III from engine prefix 361 and 364 suffix "C"
Required: 5
exhaust valve, LH cranked
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with engine suffix 'A' and 'B' 1961-75)
Required: 2
exhaust valve, LH cranked
Series III 2.25 litre Petrol from engine suffix 'C' with engine no. 361 and 364 (1975-85)
Required: 2
exhaust valve, RH cranked
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with suffix 'A' and 'B'
Required: 2
exhaust valve, RH cranked
Series III 2.25 litre Petrol from engine suffix 'C' with engine no. 361 and 364 (1975-85)
Required: 2
inlet valve, LH cranked
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with engine suffix 'A' and 'B' (1961-75)
Required: 2
inlet valve, LH cranked
Series III 2.25 litre Petrol from engine suffix 'C' with engine no. 361 and 364 (1975-85)
Required: 2
inlet valve, RH cranked
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with engine suffix 'A' and 'B' (1961-75)
Required: 2
inlet valve, RH cranked
Series III 2.25 litre Petrol from engine suffix 'C' with engine no. 361 and 364 (1975-85)
Required: 2
retaining rocker shaft
Series II
Required: 2
retaining rocker shaft
Series IIA, Series III prefix 901 and 904 and engines with prefix 361 and 364 suffix "A" and "B"
Required: 1
retaining rocker shaft
Series III from engine prefix 361 and 364 suffix "C"
Required: 1
pedestal
Series IIA and III 2.25 litre Petrol with engine prefix 901 and 904 plus engine prefix 361 and 364 with suffix 'A' and 'B'
Required: 1
Series III from engine prefix 361 and 364 suffix "C"
Required: 1
rocker arm
Series IIA, Series III prefix 901 and 904 and engines with prefix 361 and 364 suffix "A" and "B"
Required: 8
rocker arm
Series III from engine prefix 361 and 364 suffix "C"
Required: 8
rocker arm adjusting srew
Series IIA, Series III prefix 901 and 904 and engines with prefix 361 and 364 suffix "A" and "B"
Required: 8
rocker arm adjusting srew
Series III from engine prefix 361 and 364 suffix "C"
Required: 8
- original
Series II, IIA and III
Required: 4
Series III from engine no. 36139552C and 36408864C (1981-85) - feature: engines with 5-main bearing crankshaft
Required: 4
- original
Series II, IIA and III
Required: 4
Series III from engine no. 36139552C and 36408864C (1981-85) - feature: engines with 5-main bearing crankshaft
Required: 4
inlet and exhaust valve - may replace the genuine fitted double spring
Required: 8
Series III from engine no. 36139552C and 36408864C
Required: 8
Series III from engine no. 36139552C and 36408864C
Required: 16
complete unit with slide rail, roller, bolt and washer
Required: 8
cam follower
Series III from engine no. 36123672B and 36407286B
Required: 8
Required: 1
