Cylinder head - 8 cylinder engine
grey
Required: 1
ignition leads - LH
Required: 1
retaining mounting igniton leads
Required: 5
rocker shaft
Required: 4
LH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Required: 8
RH side, made from alloy - use with push rod 369293 (don't use the standard push rod)
Required: 8
inlet manifold - standard tin specification
Required: 1
inlet manifold - modern Composite specification
Required: 1
inlet manifold - modern Composite specification
Required: 1
inlet manifold gasket ends - standard specification
Required: 2
inlet manifold gasket ends - modern Composite specification
Required: 2
exchange. Complete with valve guides, valves and springs
Required: 2
new item. Bare head with valve guides, but less valves and springs - compression ratio: 8.25:1
Required: 2
made from sheet metal. Bore size: 89.9 mm, thickness: 0.2"
Required: 2
classic soft material gasket on metal layer. Bore size: 89.9 mm, thickness: 0.43"
Required: 2
Composite specification with partial serigraph covering. Bore size: 88.9 mm + 0.5 mm, thickness: 0.47", built in thickness: 0.47"
Required: 2
tapped for screw securing dipstick tube bracket
Required: 1
stainless steel, diameter: 1.57"- for 8.13:1 compression engines
Required: 8
stainless steel, diameter: 1.34" - for 8.13:1 compression engines
Required: 8
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
with soft material head gaskets on metal layer
Required: 1
