Axle casing and differential - Rover axle
Serie II, IIA
Required: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Required: 1
differential to axle casing - short, BSF
Serie II, IIA
Required: 4
differential to axle casing - short, UNF
Serie II, IIA
Required: 4
differential to axle casing - feature: 3/8"-24 UNF thread
Serie II, IIA
Required: 6
differential to axle casing - long, UNF
Serie II, IIA
Required: 6
differential to axle casing - feature: 3/8"-24 UNF thread
Serie III
Required: 6
with 4.7:1 ratio (teeth: 10/47)
Series II, IIA and III (1958-85)
Required: 1
differential pinion
Vehicles to axle suffix "A"
Required: 1
retaining bearing cap - BSF
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Required: 4
retaining bearing cap - metric
Serie III from suffix "H", 109 V8 from suffix "D"
Required: 4
for bearing adjustment
Serie II, IIA and Serie III to suffix "G", 109 V8 to suffix "C"
Required: 2
for bearing adjustment
Serie III from suffix "H", 109 V8 from suffix "D"
Required: 2
Serie II, IIA und Serie III bis Kennbuchstabe "G", 109er V8 bis Kennbuchstabe "C"
Required: 2
Serie III from suffix "H", 109 V8 from suffix "D"
Required: 2
Required: 2
differential pinion, outer
Vehicles to axle suffix "A"
Required: 1
differential pinion, outer
Vehicles from axle suffix "B"
Required: 2
outer pinion bearing
Vehicles to axle suffix "A"
Required: 1
outer differential pinion bearing
Vehicles from axle suffix "B"
Required: 1
pinion, rear position - 0.020"
Serie II, IIA
differential pinion
Serie II, IIA
Required: 1
differential input shaft - feature: 4 internal splines
Required: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Serie III
Required: 1
axle casing
Serie III from vehicle no. 14270 onwards
Required: 1
