Transfer gearbox, outer - Serie II and Serie IIA
transfer box
Series II, IIA to gearbox suffix "A" inclusive
Required: 1
transfer box
Series II, IIA from gearbox suffix "B" onwards
Required: 1
gearbox to transfer box
Required: 6
gearbox to transfer box
Required: 2
0.005"
0.010"
0.040"
retaining speedometer housing
Required: 1
for pinion
Required: 1
Required: 2
for housing
Required: 1
needle bearing
Required: 2
Required: 1
Series II, IIA to gearbox suffix "A" inclusive
alternatives: 1/8", please check before ordering
Required: 1
oil drain
Series II, IIA to gearbox suffix "A" inclusive
alternatives: 1/4", please check before ordering
Required: 1
Series IIA from gearbox suffix "B" onwards
Required: 1
- lower position, transfer box
Required: 1
retaining cover plate to transfer box
Required: 10
- upper position, transfer box
Required: 1
- early models with filler plug hole
Series II, IIA to gearbox suffix "A" inclusive
Required: 1
- late models without filler plug hole
Series IIA from gearbox suffix "B" onwards
Required: 1
retaining cover plate to transfer box
Required: 4
- early models
Series II, IIA to gearbox suffix "A" inclusive
Required: 1
- early models
Series II, IIA to gearbox suffix "A" inclusive
Required: 1
Required: 1
- LH
models with 2.0 litre petrol engine
Required: 1
- LH
All models except 2.0 litre petrol engines
Required: 1
- RH
models with 2.0 litre petrol engine
Required: 1
- RH
All models except 2.0 litre petrol engines
Required: 1
gearbox mounting
models with 2.0 litre petrol engine
Required: 2
for the oil seal of the transfer box output shaft
Required: 1
for the oil seal of the transfer box output shaft
Required: 1
selector shaft
Required: 1
retaining dust cover
Required: 3
