Axle casing, differential and propshaft
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Required: 1
differential input shaft - feature: 4 internal splines
Clsssic to VIN...BA167941 (1970-85)
Required: 1
differential input shaft - feature: 24 internal splines
Classic from VIN...CA167942 (1985-96)
Required: 1
Required: 1
differential - 3/4"-14 BSPT thread with 5/8 "AF square socket
Required: 1
differential to axle casing - feature: 3/8"-24 UNF thread and 1.3/4" length
Required: 6
retaining differential housing to axle housing - short
Required: 4
3.54:1 ratio - feature: securing with flange nut
Required: 1
set with bevel gears with 10 splines, shaft, circlips and slotted spring pin
Classic with axle suffix 'A' (1970-73)
Required: 1
for front and rear axle. Set with bevel gears with 16 & 9 splines, shaft, circlips and slotted spring pin
Classic from axle suffix 'B' to VIN...HA610293 (1973-91)
Required: 1
set with bevel gears with 10 splines, shaft, circlips and slotted spring pin
CLassic from VIN..JA610294 to KA637568 (1991-93)
Required: 1
set with bevel gears with 24 splines, shaft, circlips and slotted spring pin
Classic from VIN...KA637569 (1993-96)
Required: 1
planet gear shaft
Classic with axle suffix 'A' (1970-73)
Required: 2
retaining planet gear to shaft
Models from axle suffix B
Required: 2
retaining crown wheel - BSF
Models to axel suffix A
Required: 16
retaining crown wheel - UNF
Models from axle suffix B
Required: 10
retaining crown wheel
Models from axle suffix B
Required: 10
front axle
3.5 V8 with manual transmission to VIN...BA167941 (1970-85)
Required: 1
front axle
3.5 V8 with automatic transmission to VIN...BA167941 (1970-85)
Required: 1
front axle
V8 and Diesel with manual gearbox but without catalyst from VIN...CA167942 to HA610293 (1985-91)
Required: 1
front axle
V8 and Diesel with manual transmission and catalytic converter from VIN...CA167942 to HA610293 (1985-91)
Required: 1
front axle
3,5 V8 with automatic gearbox and all Diesel models from October 1985 (from suffix CA)
Required: 1
front axle
3,9 and 4,2 V8 models from October 1985 (from suffix CA)
Required: 1
greaseable type with 82 mm overall length
Models to September 1985 (to suffix BA)
Required: 2
greaseable heavy duty type with 82 mm overall length
Models to September 1985 (to suffix BA)
Required: 2
greaseable type with 75 mm span width and 27 mm cup diameter
Models from October 1985 (from suffix CA)
Required: 2
greaseable heavy duty type with 75 mm span width and 27 mm cup diameter
Models from October 1985 (from suffix CA)
Required: 2
