Competition parts

front shroud. Hand beaten copy with stainless steel mesh

€14.48

Product number: 5925

Air vent

reproduction of the Lucas 43D4 side entry distributor with vacuum advance - competition type for tuned engines

€632.39

Product number: 326091

Aldon Distributor

43D4 competition type yellow - without vacuum unit

€614.59

Product number: 303236

948, 1098 and 1275 cc engines (1958-74)

Aldon Distributor

clutch, Identification: 20 splines, shaft length: 33.2 mm

€685.94

Product number: 303238

Alignment tool

clutch, Identification: 10 splines, shaft length: 33.2 mm

€22.43

Product number: 16586

Midget 1500 (1974-79)

Alignment tool

€22.43

Product number: 16585

948 cc, 1098 cc and 1275 cc (1958-74)

C40 conversion kit for negative earthed cars. Capacity: 40 ampere, shaft diameter: 15 mm, PCD of fixing holes: 145 mm, Distance between mounting brackets (at the holes): 144 mm

€380.00

€351.05

Product number: 479752

MGA (1955-62) • MGB to November 1967 (Roadster to GHN3-138360, GT to GHD3-137795)

From October 1962 to November 1967 (Sprite from HAN7-24732 to HAN9-72033, Midget from GAN2-16184 to GAN4-60440)

conversion kit C40 for negative earthed cars. Variant with mechanical tacho drive. Capacity: 40 Amps. Dimensions: shaft diameter: 15 mm, PCD of fixing holes: 144 mm, Distance between mounting brackets

€489.99

€454.58

Product number: 481152

TD and TF (1950-55) • YB (1951-53) • Magnette ZA and ZB (1953-58)

Vehicles with 948 cc engine: Sprite to HAN6-24731, Midget to GAN1-16183 (October 1962)

C40 conversion kit for positive earthed cars. Capacity: 40 ampere, shaft diameter: 15 mm, PCD of fixing holes: 145 mm, Distance between mounting brackets (at the holes): 144 mm

€427.21

Product number: 491267

MGA (1955-62) • MGB to November 1967 (Roadster to GHN3-138360, GT to GHD3-137795)

From October 1962 to November 1967 (Sprite from HAN7-24732 to HAN9-72033, Midget from GAN2-16184 to GAN4-60440)

conversion kit C40 for positive earthed cars. Variant with mechanical tacho drive. Capacity: 40 Ampere, shaft diameter: 15 mm, PCD of fixing holes: 144 mm, Distance between mounting brackets (at the h

€529.55

Product number: 492202

TD and TF (1950-55) • YB (1951-53) • Magnette ZA and ZB (1953-58)

Vehicles with 948 cc engine: Sprite to HAN6-24731, Midget to GAN1-16183 (October 1962)

12 volt lightweight alternator with 50 ampere

kits include alternator, pulley and fan. It is converting the car from positive to negative ground

€489.52

Product number: 499555

MGA (if alternator conversion) • MGB (1962-80) • MGC (1967-69) • MGB V8 (1973-76) • MG RV8 (1992-96)

from July 1972 Midget from GAN5-123731 with 12V588 and 12V778 engines plus all Midget 1500

Alternator conversion

€179.00

Product number: 503183

From October 1962 to November 1967 (Sprite from HAN7-24732 to HAN9-72033, Midget from GAN2-16184 to GAN4-60440)

front suspention. Reinforced version with 7/8" diameter

€565.54

Product number: 12563

Midget 1500

front suspention. Reinforced version with 5/8" diameter

€163.28

Product number: 741

948 cc, 1098 cc, 1275 cc

front suspention. stronger version with 11/16" diameter

€168.18

Product number: 742

948 cc, 1098 cc, 1275 cc

front suspention. Reinforced version with 3/4" diameter

front with 3/4" diameter, including nylatron bushes for rear springs

€252.52

Product number: 17503

948 cc, 1098 cc, 1275 cc

Anti roll bar kit

front suspension. Stronger version with 11/16" diameter plus polyurethane bushes for rear springs

€349.03

Product number: 25007

Midget 1500

Anti roll bar kit

rear. Competition type with adjustable rose joints

€210.71

Product number: 25008

1098 cc, 1275 cc (1964-74)

Anti tramp bar kit

€1,216.76

Product number: 17810

Midget from GAN3-25788 (January 1964), Sprite from HAN8-38829 (March 1964) - feature: vehilcles with semi elliptic leaf springs

Anti tramp bar kit

rear

main bearing cap, competition version

€541.78

Product number: 17809

from January 1964: Midget from GAN3-25788, Sprite from HAN8-38829 - feature: vehilcles with semi elliptic leaf springs

ARP Bolt kit

high grade 8470 chrome moly with a tensile strength of 220.000 psi ensure substantial strength and reduce stretching - supplied in sets of 8 plus nuts

€358.29

Product number: 295169

to October 1966 with 948 cc and 1098cc. engine: Sprite to HAN8-64734 and Midget to GAN3-52389

Pleuelbolzen
Con rod bolt
Boulon de bielle
Drijfstang bout
Torni

ARP Con rod bolts

for standard and forged con rods - made of high grade 8740 chrome moly steel and heat treated to a nominal tensile strength of 200,000 psi. Threads are rolled after heat treat to ensure optimum fatigu

€225.52

Product number: 342886

MGB with 18V engines from August 1971: Roadster from GHN5-258001, GT from GHD5-258004

from October 1966 to October 1974 with 1275 cc engine - Sprite from HAN9-64735 to AAN10-87824, Midget from GAN4-52390 to GAN5-153920

ARP Con rod bolts