Crankshaft 948 ccm & 1098 ccm
distributor drive, variant with groove for 'O' ring
Required: 1
new item with peg drive
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
with pin drive - reconditioned, in exchange
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
new item - with peg drive
from October 1962 to September 1966 with 1098 cc engine: Sprite from HAN7-24732 to HAN8-64734, Midget from GAN2-16184 to GAN3-52389
Required: 1
with peg drive - reconditioned, in exchange
from October 1962 to September 1966 with 1098 cc engine: Sprite from HAN7-24732 to HAN8-64734, Midget from GAN2-16184 to GAN3-52389
Required: 1
uprated single row endless chain with 52 pitches
Required: 1
for 1st and 3rd cylinder - identified by floating gudgeon pin
models with 1098 cc engines (1962-66)
Required: 2
for 2nd and 4th cylinder - identified by floating gudgeon pin
models with 1098 cc engines (1962-66)
Required: 2
Required: 1
standard size - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.010" - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.020" - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.030" - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
+0.040" - standard steel-backed aluminium alloy type. Feature: upper and lower half with groove and oil hole
Required: 1
9C and 9CG engine series. Main identifier: 1.75" main bearings and crankshaft flange with 3.1/4" diameter - reconditioned, in exchange
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
9C and 9CG engine series, reconditioned, compleate with bearings. Outright - main identifier: 1.75" main bearings and crankshaft flange with 3.1/4" diameter
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
main identifier: 1.75" main bearings and crankshaft flange with 3.1/4" diameter - reconditioned, in exchange
from October 1962 to March 1964 with 10CG series engines with 1098 cc: Sprite from HAN7-24732 to HAN7-38828, Midget from GAN2-16184 to GAN2-25787
Required: 1
reconditioned, compleate with bearings. Outright - main identifier: 1.75" main bearings and crankshaft flange with 3.1/4" diameter
from October 1962 to March 1964 with 10CG series engines with 1098 cc: Sprite from HAN7-24732 to HAN7-38828, Midget from GAN2-16184 to GAN2-25787
Required: 1
main identifier: 2" main bearings and crankshaft flange with 3.1/2" diameter - reconditioned, in exchange
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 1
reconditioned, compleate with bearings. Outright - main identifier: 2" main bearings and crankshaft flange with 3.1/2" diameter
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 1
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 8
with ring gear - reconditioned, in exchange
to October 1962 with 948 cc engines: Sprite to HAN6-24731, Midget to GAN1-16183
Required: 1
with ring gear - reconditioned, in exchange
from October 1962 to March 1964 with 10CG series engines with 1098 cc: Sprite from HAN7-24732 to HAN7-38828, Midget from GAN2-16184 to GAN2-25787
Required: 1
with ring gear - reconditioned, in exchange
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 1
flywheel
to March 1964 with 948 cc engines and 10CG series engines with 1098 cc: Sprite to HAN7-38828, Midget to GAN2-25787
Required: 2
flywheel
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 2
flywheel - feature: 104 teeth and 232 mm internal diameter
from March 1958 to October 1962 with 948 cc engine: Sprite from HAN5-501 to HAN6-24731, Midget from GAN1-101 to GAN1-16183
Required: 1
flywheel - feature: 104 teeth and 267 mm outer diameter
from October 1962 to September 1966 with 1098 cc engine: Sprite from HAN7-24732 to HAN8-64734, Midget from GAN2-16184 to GAN3-52389
Required: 1
crankshaft rear - feature: Flywheel with 1.75" bore for crankshaft
to March 1964 with 948 cc engines and 10CG series engines with 1098 cc: Sprite to HAN7-38828, Midget to GAN2-25787
Required: 1
crankshaft rear - feature: Flywheel with 2" bore for crankshaft
from March 1964 to September 1966 with 10CC series engines with 1098 cc: Sprite from HAN8-38829 to HAN8-64734, Midget from GAN3-25788 to GAN3-52389
Required: 1
dimensions: 66.929 x 66.192 x 134.137 mm
948 cc
Required: 4
dimensions: 64.567 x 67.132 x 134.137 mm
1098 cc
Required: 4
