Cylinder block 1500 ccm
Required: 1
wing type made from steel - with 9/16" BSP thread
alternatives
Required: 1
wing type made from brass - with 9/16" BSP thread
Required: 1
original brass type - with 9/16" BSP threadq
Required: 1
oil seal - in rear engine plate
Required: 1
oil pressure pipe to cylinder block
to GAN6-198804
Required: 1
for oil pressure relief valve, uprated version allows working pressure of 75 to 85 PSI
Required: 1
crankshaft sealing block, front. Wooden variant with following dimensions: 25 x 15 x 6 mm
Required: 2
cylinder block, front - reproduction in aluminium
Required: 1
cylinder block, front - used die cast item
Required: 1
dipstick
Required: 2
front
Required: 1
fixed timing mark
Required: 1
multiple timing mark
Required: 1
leather
alternatives
Required: 1
Required: 1
oil drain and oil filler - magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
alternatives
Required: 1
oil drain and oil filler - non magnetic plug with tapered 3/8" NPT thread with 18 TPI and square head
alternatives
Required: 1
less oil seals
supplied without oil seal
Required: 1
non-setting gasket and jointing compound
Required: 1
Content: 80 ml (€199.88 / 1000 ml)
Curil K2 - non hardening
Required: 1
Content: 60 ml (€198.33 / 1000 ml)